For Sale 12ht/2h bell housing sold

[roma042987]

Location

United States

I ended up with a spare by accident. I had one shipped in from Canada then picked up an h55 that had one as well. I'll probably regret selling it a year from now when I find another diesel to stick something in. This is an aluminum housing to mate to an H55f. Should fit 4 speeds I believe as well. I also have the plate that goes between the block and bell housing. The plate is from an auto but identical as the manual one except it has an access hole to access torque converter bolts. It's freshly powder coated.
200 plus shipping for the pair.

SOLD

 

[orangefj45]

Is one of those fuel filler necks a spare? I need one .....

$200 is a solid deal on the BH and spacer!!!!!!!

Georg @ Valley Hybrids

 

[roma042987]

thanks Georg. i'm going to hang on to the other filler neck for the moment though sorry.

 

[roma042987]

I have a 12ht clutch fork to go with this as well.

 

[orangefj45]

I might have to buy this stuff just to have it sitting in the stash ......

Georg @ Valley Hybrids

 

[roma042987]

Here are some pictures I have this auto flywheel I can throw in with the deal and the proper flywheel bolts. (Same for auto and manual)

 

[OGBeno]

I might have to buy this stuff just to have it sitting in the stash ......

Georg @ Valley Hybrids

Not a bad idea Georg considering the 12H-T was such a short-lived engine variant worldwide.

And it is also a sought after power plant as you well know... And 33030-60450 is a direct fit.

 

[roma042987]

Not a bad idea Georg considering the 12H-T was such a short-lived engine variant worldwide.

And it is also a sought after power plant as you well know... And 33030-60450 is a direct fit.

What's 33030-60450?

 

[OGBeno]

Sorry.

The available US H55F that is a direct fit to all 2F/3F-E/2H/12H-T engines....

IE: I AM TRYING TO HELP YOU SELL YOUR PARTS.

 

[DanS HJ-45]

Sorry.

The available US H55F that is a direct fit to all 2F/3F-E/2H/12H-T engines....

IE: I AM TRYING TO HELP YOU SELL YOUR PARTS.

This is a most critical piece (that Roma is selling) to mate a 12HT to an H55f (or H41/42, but who does that with a 12HT really). The only bits see missing are the various rubber plugs and bellows, which are also available new, IIRC. At least, I am 99% sure we bought new ones for ours.

This bell housing lets you buy a 12HT that had an auto tranny attached to it, and couple it to the right transmission.

This is a great deal on a bell housing for the 12HT.

Dan

 

[roma042987]

This is a most critical piece (that Roma is selling) to mate a 12HT to an H55f (or H41/42, but who does that with a 12HT really). The only bits see missing are the various rubber plugs and bellows, which are also available new, IIRC. At least, I am 99% sure we bought new ones for ours.

This bell housing lets you buy a 12HT that had an auto tranny attached to it, and couple it to the right transmission.

This is a great deal on a bell housing for the 12HT.

Dan

thanks Dan. The clutch fork bellows/boot isn't missing it's sitting on a shelf with the rest of my spares and yep they are the same as an fj60 31126-60021 16.68 from Toyota.

 

[OGBeno]

thanks Dan. The clutch fork bellows/boot isn't missing it's sitting on a shelf with the rest of my spares and yep they are the same as an fj60 31126-60021 16.68 from Toyota.

Big negative. Toyota MSRP on that unit is $22.47.

$16.68 is the discount you are getting it at which is quite a nice discount.

I'd shop there.

 

[joekatana]

Roma I might be bringing a 12HT so either you might wanna hang on to that belhousing and buy my engine ,or I might just buy your belhousing

Joe

 

[roma042987]

bump I still have this

 

[CenTXFJ60]

Roma, I'll take it. I'm certain my son and I will find something to do with this down the road. PM inbound. Thanks, Jim.