120,000 mile Parts List

[MH_Stevens]

Most 80's are up to 120,000 or more miles by now and due for some major service (if not already done). My own cruiser at 118,000 needs plugs, possibly wires and distributor cap and rotor, starter contacts, a PPH and probably a bunch of other bits that I am about to get ordered from Dan. I'm sure there are many other parts I should be getting while making the order so can we put together a list of bits to be potentially replaced once the cruiser get to be an old girl? No need to include major service item that stand alone like the axle jobs.

Mike

 

[alaskacruiser]

off the top of my head: new fan clutch, gas cap, radiator cap, overflow cap + hose, pcv valve, rear bearing repack kit

 

[Romer]

fuel filter

 

[LX_TREME]

Last year i did:

Lubricate drive shaft bushing
Lubricate propeller shaft and re-torque bolts
Lubricate steering knuckle
Repack front wheel bearings
Rotate tires
Brake linings/ brake pads/discs
Charcoal canister 2
Drive belts
Exhaust pipes and mountings
Fuel lines and connections, fuel tank band and fuel tank vapor vent system hoses
Fuel tank cap gasket
Steering gear box for leakage
Steering linkages
Transmission, transfer and differential oil
Valves (audible inspection), adjust if necessary
Inspect nuts and bolts on chassis and body.

 

[alaskacruiser]

Last year i did:
Lubricate drive shaft bushing
Lubricate propeller shaft and re-torque bolts
[...]
Inspect nuts and bolts on chassis and body.

In other words, last year you read through your owner's manual.

 

[MH_Stevens]

I know what services I need do in general, it was a list of parts needed to get all at once economically from Dan. So often you start a job like changing the plugs and find you needed some sealing washer you didn't have. Thanks for the radiator cap reminder i had forgot that and its important.

 

[cruiserdan]

A list of stuff to ponder:

Dist cap, 19101-66010
Rotor, 19102-61240
Wires, 90919-21557
Plugs, 90919-01176
PCV valve, 12204-35040
PCV grommet, 90480-18001
PCV hose, 12261-66021
Crank case vent hose, 12262-66021
Fuel filter, 23300-69045
Air filter, 17801-61030
Inspect valve adjustment,
11213-66021 x1 valve cover gasket, 11193-15010 x6 spark plug tube seals 22271-66010 throttle body gasket
All coolant hoses
Antifreeze
Pack front wheel bearings, 90311-62001 x2 90215-42025 x2 43422-60060 x2 90520-31007 x2
Pack rear wheel bearings, 90311-62002 x2 90310-35001 x2 43422-60040 x2
Inspect brakes, both axles
Service front axle (another tome)
Oil and filter change, 15600-44010, 90430-12031 and oil of your choice
Drain and refill rear axle, 80-90 x3 quarts
Drain and refill transmission, about 4-6 quarts ATF



And yes, the part numbers came out of my head.....

 

[elmariachi]

Add thermostat and o-ring.

 

[cruiserdan]

Of course.

90916-03117 x1
16346-66020 x1

 

[MH_Stevens]

Thanks everyone. Now I'm bulking at changing the belts and hoses because mine look just too good. Anyone want to tell me why I might be wrong here?

 

[cruiserdan]

If they are original to the vehicle they are at the end of their service life. If they look "that good" perhaps they have been replaced at some point. Do you have any of the service records? What type of clamps are on the hoses? Often replacement hoses do not have OEM clamps re-used on them.

 

[MH_Stevens]

Should I add a fan clutch or water pump to this list? I have NO cooling problems.

 

[MH_Stevens]

Thanks for the input. Here is what I ordered.

THE PARTS
Dist cap
Rotor
Wires
Plugs
PCV valve
PCV grommet
PCV hose
Crank case vent hose
Air filter
Oil filter #3 (three)
Inspect valve adjustment,
valve cover gasket
x6 spark plug tube seals
throttle body gasket
All drive belts
All coolant hoses (incl phh)
x2 Antifreeze Toyota Red (2 gallons)
Pack rear wheel bearings kit (done front and brakes)
Axle drain plug washers #4
Starter Motor Contact replacement kit
Radiator cap
Thermostat
Fan Clutch
Door lock piezo beeper