clips

I have a mixed bag of plastic body and fender clips for the 80 series. Probably 20+ clips in the bags. $5 plus shipping or local pickup in Tucson. Louis Lrowe_csp@hotmail.com 703 nine nine four 5816

Just realized I routed my vacuum advance hose from distributor to carburetor incorrectly. Looking for QTY (3) 90468-05025 clips that attach the vacuum hose to fuel hard line as shown. Has anyone found an alternate Toyota clip part number that is still available?

Looking for (4) clips for my fj40s rear heater. Let me know if you have any available or know of a suitable replacement. Thanks! Rob NJ - 07004

I swapped out my damaged visors for LS400 visors. I bought Solvefunction clips, but the screws from the factory clip don't purchase any material in the roof when used in the holes that Lee says they should. In the absence of any other ideas, I'm wondering if a prior owner put in different...

Looking for four jack rod clips as shown below (photo courtesy of wscbill, who I believe got the pic from treerootco). Will buy outright, but am also very open to trade tools or memorabilia (pictured under the clips are some things available for trade). If you have the clips and are willing to...

Decent condition snake blinders for sale. Not pristine, some tarnish and some micro dents but straight on the whole - will forward clearer photos to prospective buyer. Never going to get around to getting them on my 60 so onwards they go. $ 250 US plus shipping cost. Approx $45 US...

I have a 2000 LC and am going through trying to clean it up. In the process I am removing what Toyota calls garnish, I call interior trim. I am trying to locate the trim clips proper for the various trim/garnish pieces. To begin with I just want to grab the most common, so far what is see is...

I was pulling on the speedo cable to get a bit more slack to plug it back into the cluster and it popped and I had more slack... Either I pulled it out of the trans, which sems unlikely as its' threaded, or there was a clip somewhere between there and the cluster, that I pulled it out of...

These factory clips are NLA. Anyone have any luck finding an alternative? These clips look similar, but likely different diameters...

Hi all, The driver side door cladding broke loose and the dryer at the car wash blew it off. All the clips stayed on the door and the plastic panel went flying. It looks like the plastic clips had a metal piece that "bit" a lip on the panel, but the metal has rusted over the years. The clips...

Does anyone know if the clips that hold the inner weatherstrip trim (inside the door, alongside the glass) changed at some point.. I am getting conflicting information .. there's a plastic clip and a steel clip. Is it possible that when the model update was done (square double headlights etc)...

Selling brand new OEM rear step plate screw clips, part number: 90467-04020-06. See pics for reference. From forum posts, these are for 91-94 models with brown (sable) interior, though they should fit all years (just not a color match). Bought a 10-pack from Japan. Only needed a couple...

I need to remove the splash guards on my 08 LC to install the Hewitt block off plates that come with the Gen II SAIS kit. Does anyone have a clue how to remove these 3 white clips without destroying them? Also, if anyone has a Toyota part number for them it sure would give me some peace of mind...

Hello all, Can anyone tell me the part number for these retainer clips? They are for the tail lights mounted on the tail gate of my 2003 Land Cruiser 100 series. They don't grip the pins anymore so the light wobbles, i tried building the pins up to make a tighter fit but still sloppy. Thanks

Anybody have window belt moulding clips they want to sell me? I need them for a 1994 FZJ80. Toyota part # is 68211-60030. I’m located in Central California. Thanks.

While fixing a water leak I noticed two clips were broken off the tailgate mat cover in my lx470 so no it won't securely fasten. Is there a remedy without spending $300 on a new piece? Part # is 5857460060A1 and pics below Thanks

Looking for two OEM rims w/clips. I currently have three of them but would like two more to complete the set. Thanks.