Anyone know if the fj60 body will fit on the fj62 rails? My rails on the 60 are quite rusted and would like to place the decent body on the fj62 that I just bought that has good frame rails.
Last edited:
FJ60 Body on FJ62 Rails/Chassis
- Thread starter NYC-CRUISER
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #2
Does anyone have an idea at all?
I don't have a clue. I'm putting a bobbed 40 cab on a 60 frame so nothing fits.
I don't see any reason it would not fit. Yes there are minor differences but I doubt the differences are in the mounting locations. Plus when you lift the 60 body and wheel the 62 frame under it you'll be able to see very quickly.
Good luck....(doubt if you're gonna need it though).
Good luck....(doubt if you're gonna need it though).
these are from the 1980 & 1984-1990 body & chassis manuals. "FJ-60" is on the top, "FJ-62" is on the bottom. There are differences in the frame (rear crossmember is different) but the body mounts look like they are in the same locations. Unfortuantely, Toyota chose to dimension the two schematics differently, so it's difficult to compare directly...
I have a 1984 FJ60 frame for sale. No rust. $200.00 plus the ride.
- Thread starter
- #7
i might be interested. Are you willing to ship? I could find out about the cost for shipping and the carrier.
Thanks,
Thanks,
- Thread starter
- #8
2mbb
Thanks, I am going to try it out and will post pictures during and after the process.
Will be doing this shortly...All the major stuff is the same with some good improvments of the fj62 frame. Beefer spring mounts and I think one or two others I cant think of off the top of my head. Plus they are newer and have a better chance of being rust-free.
Someday I will be going the other way...62 body on a 60 frame....willw atch for hints and tricks...
Just asking why?...fj62 has a slighty stronger frame. Im sure it will be fine either way...just asking why.
Beacuse my 60's body is a rusty mess...I found a 62 body rust free and cheap...the frame of my truck is all good and has the v8 motor mounts and everything all done....
I have no problem shipping it.
Anybody know how much a bare FJ60 frame weights? I'm guessing 450 lbs.
I will have to weigh my trailer and then weigh my trailer with the frame on it. I'm traveling this week so it won't happen till next week.
Anybody know how much a bare FJ60 frame weights? I'm guessing 450 lbs.
I will have to weigh my trailer and then weigh my trailer with the frame on it. I'm traveling this week so it won't happen till next week.
Totally forgot about this thead. Still have the frame? or...know of anyone who can cut out and weld steel square tubing to make the dimentions of the frame? Next build a cross over tube for shocks.
Did anyone ever find out a definitive answer? On if an fj60 body will fit an fj62?
there are differences in PS box and crossmember, but the bodies are the same.
So everything else will be a direct swap including interior , dash etc. ? I will need to relocate the cross member and do what with the power steering box ?
maybe I didn't understand your question. a specific question on what you are doing would help.
depending on what years you are looking at, there are some differences in the interior also, front seat brackets, trans hump cover, etc.
depending on what years you are looking at, there are some differences in the interior also, front seat brackets, trans hump cover, etc.
Swapping a complete 89 fj62 onto an 85 fj60 body.
brian
SILVER Star
Whats this about ps box being different?
