Search results for query: *

Forum search Google search

  1. cruiserfj45

    Dr Gil 1FZ-FE rebuild

    I am starting this thread to document the rebuild of this engine for @Dr Gil. He wants to keep his 96 Cruiser running for as long as possible and felt is was time to get a fresher engine. His is still running strong but wanted to get ahead of if. He purchased an engine out of a 94 Cruiser...
  2. cruiserfj45

    Whats needed to swap a 94 1FZ into a 96?

    I have been searching and can't find exactly what needs to be done so if there are any threads please link it and I will follow. I know the heads are interchangeable with just slight differences in casting. The big difference I have found is the upper oil pan and crank position sensor, and all...
  3. cruiserfj45

    Looking for rubber steering rack bushings, too much feed back in steering from polly

    I just installed a set of whiteline polly steering rack bushings on a 2000 Cruiser and now I an feeling every bump in the road. It's like bump steer but the truck isn't moving around, its just the steering wheel that is giving a ton of feed back. It doesn't appear that the bushings are...
  4. cruiserfj45

    Fuel cap part number?

    Maybe I'm just missing it but does anyone know the part number for the fuel cap for a 65 FJ45. Its probably out there I'm just missing it in my searches.
  5. cruiserfj45

    Need part number for front locker actuator plug, motor side

    The plug on the actuator motor side on my customers truck crumbled. Does anyone have the part number?
  6. cruiserfj45

    Difference between 91 and 95 fuel tank???

    Is there a difference or are they interchangeable?
  7. cruiserfj45

    Parting Out  88 FJ62 in Fresno

    I bought this truck with a bad transmission and some rust with the intention of swapping in a manual and repairing the rust. The frame is solid as far as I can tell but the doors were shot with a few other small spots. Well the more I started checking out the body the more rust I found. At...
  8. cruiserfj45

    Parting Out  84 FJ60 in Frenso

    Too much to list. Engine is un tested because oil pan skid plate took a hit and doesn't hold oil. It does spin over. All doors except drivers door are available and in good shape. No seats, interior panels or dash. Lots of other small pieces available. Transmission, t-case and axles all in...
  9. cruiserfj45

    OEM Euro Spec FJ60 Mirrors or OEM 70 series mirrors???

    Which ones are better for visibility and life expectancy. OEM Euro Spec Land Cruiser FJ60 Mirrors - Set of 2 OEM 70 Series Black Mirrors, Fits FJ60 - Set of 2
  10. cruiserfj45

    Cylinder Head Experts, Is This Crack Repairable?

    While doing a valve adjustment for a customer, on a 91 FJ80, I noticed a glimmer of green in the sun. After pressure testing and cleaning the suspected areas I found this. It is located between the exhaust valves for cylinder 2 and 3. There is also a smaller one in the same spot but between...
  11. cruiserfj45

    WHat did this 5vz-fe come out of?

    I installed one of these low mileage Japanese engines in a 4Runner. I don't recognize what it may of come out of with the heater hoses running across the top of the intake. The main computer harness comes off the engine at the alternator and goes through a bulkhead a few inches from that. It...
  12. cruiserfj45

    Warn M8000 vs. XD9000

    This is a cross post because the winching thread (Warn M8000 vs. XD9000) has little traffic and science this is going on my FJ60 I thought it would apply: Due to some trading I now own both of these winches. In the name the XD9000 sounds better but when you look at motor HP and gear ratio the...
  13. cruiserfj45

    Warn M8000 vs. XD9000

    Due to some trading I now own both of these winches. In the name the XD9000 sounds better but when you look at motor HP and gear ratio the M8000 has .2 hp more and a gear ratio 60:1 lower. To me that means the 8000 may be slower but has more pulling power. Is the M8000 under rated like the...
  14. cruiserfj45

    For Sale  1977 Ford F150 Ranger 106,690 mi 4x4 Rust free Fresno, CA $6,000

    SOLD This ad is for a friend of mine. 1977 Ford F150 Ranger 106,690 mi, 4x4, 351M, Dana 44 HP, front ford 9" rear, C6 transmission, NP205 transfer case. He bought this truck brand new from Finnin Ford in Haven, KS and moved to CA the next year. He has the original owner’s manual and owner...
  15. cruiserfj45

    Can someone look at a 98 in Belflower for me?

    I Live up in fresno and have been looking at this Cruiser. Can someone have a look at undercarriage and mechanical portion for me before I head down? It has a lot of miles but I am a Toyota mechanic so I can fix lots of things. Thanks, Jacob 1998 Toyota Land Cruiser AWD 4dr SUV In Bellflower...
  16. cruiserfj45

    Can someone look at a 98 in Belflower for me?

    I Live up in fresno and have been looking at this Cruiser. Can someone have a look at undercarriage and mechanical portion for me before I head down? It has a lot of miles but I am a Toyota mechanic so I can fix lots of things. Thanks, Jacob 1998 Toyota Land Cruiser AWD 4dr SUV In Bellflower...
  17. cruiserfj45

    For Sale  Clean 89 1st gen 4Runner 22RE 5 speed Fresno, CA

    SOLD My friend is buying my FZJ80 as soon as he sells his 4Runner. I have helped him and the previous owner slowly get this truck back up to great running shape. I am unable to attach pictures but here is the Craigslist link: 1989 4runner 22re I am only selling my 4Runner because I bought a...
  18. cruiserfj45

    For Sale  63 FJ40 Chev TBI Sacramento CA $6,100

    Not mine just found it looking for other parts. Repairable Title - Specialized Parts Planet
  19. cruiserfj45

    What camp shower and toilet are you using?

    Due to some injuries my in-laws won't be making it to Pismo for turf-n-surf so there trailer wont be making it as well. So now we are on the hunt for an on demand propane shower and enclosure and some sort of toilet for those middle of the night callings. I am looking for any recommendations...
  20. cruiserfj45

    Can I replace an A440f with a A442F?

    Budget being what it is I have a line on a 91 FJ80 with a bad trans and a good trans out of a 93 FZJ80. Can I use the two and get one good trans out of them? I haven't found a thread on this so if it is already here please post the link.
Back
Top Bottom