Search results for query: *

Forum search Google search

  1. M

    Master Cylinder Cap Replacement Part

    I have a dimly lit brake warning light on the dash. I traced it down to the master cylinder cap as the culprit. Is there a way to clean/rebuild that switch? I am seeing it appears to be Toyota part number 8446060020 , however, that is discontinued. Is there another source for them? I see all...
  2. M

    EGR Pipe Insulation

    Has anyone tried to put insulation around the EGR pipe? I have the plenum off to fix the VSV and am working on making sure the harness is tied out of the way of the EGR pipe to avoid that issue. Looking at the compression fitting on the side of the tube that goes to the EGR valve it looks like I...
  3. M

    Throttle Body / Intake Vacuum Ports for EGR

    Hey All, I'm tracking down a P401 insufficient EGR issue. I've followed the FSM to check for vacuum at the EGR valve during cold/warmed up at 2500 rpm as well as moving the vacuum line from the modulator to the vacuum circuit. I did not see vacuum at the EGR valve in any of those conditions. The...
  4. M

    Toyota Parts Website is Now Terrible to Search?

    I just tried jumping on https://parts.toyota.com/ to grab some parts numbers and it seems they did an interface refresh and made the site terrible to search. Is that true or am I missing something? I was trying to pull up the part diagrams and can't seem to find them. It doesn't seem like there...
  5. M

    CA Smog with a 1995

    My 1995 is OBDII. I see most of the shops here (in California) quote ~$100 for a 1995 and older and ~$50 for a 1996-1999. I'm assuming the 1995 and older number is for a non OBDII vehicle? So should my 1995 really be done to the 1996 price? I don't believe the 1995 OBDII trucks have any...
  6. M

    Wanted  Northern CA 80 Series Front Axle Housing

    Looking for an unlocked 80 series front axle housing to replace a bent one. Just need the housing.
  7. M

    Oil Seal Leak / Knuckle Centering

    I rebuilt the front axle on my 80 back in 2019 (has a loose wheel bearing so did the whole thing as PM) and about a year later developed minor evidence of birf soup on the drivers side. Its never been leaking a ton, but the grease was clearly oily on that side and normal on the other. I've also...
  8. M

    Track Bar Play / Death Wobble

    I've been trying to track down a case of death wobble for a month or two now. The truck drives well on the highway + around town. However, if I hit a moderately large pot hole between ~35-40mph the steering will start to shimmy and left unchecked it will get uncontrollable until I slow down. If...
  9. M

    Alignment / Suspension Shop Recommendations

    Hi All, New to the bay area and looking to get an alignment / death wobble looked at. Anyone have recommendations on a shop? I'm in the Sunnyvale area, so fairly central.
  10. M

    Bay Area Shop Recommendations

    Hi All, New to the bay area and looking to get an alignment / death wobble looked at. Anyone have recommendations on a shop? I'm in the Sunnyvale area, so fairly central.
  11. M

    Cooper ST Maxx Tires Uneven Wear

    Has anyone else experienced uneven / cupping tire wear with the cooper ST Maxx tires? I have a set of pizza cutters (255/85) that has ~32k on them and have generally been pretty happy with them. However, over the last year or two they have been cupping more and more. Interestingly its on all 4...
  12. M

    Pitman Arm Torque

    I had my pitman arm off to pull the steering box and weld up some cracks in the frame there. When I pulled the nut that holds the pitman arm to the steering box I noticed it was just snug, but not torqued. I was able to back it off with a 8in crescent wrench without much effort. I assumed it was...
  13. M

    Stock Sub Bolt in Replacement

    I did some digging but didn’t see anything. Is there a drop in replacement for the factory sub? Mine is shot, but not really looking to add an amp and such.
  14. M

    Panhard / Frame Crack Repair Questions

    I've noticed my truck has a small crack where the panhard bracket welds to the frame under the steering box. From researching, it seems this is a relatively common location for cracking. I need to do a bit more cleaning / inspection, but it seems to be isolated to just the weld / panhard bracket...
  15. M

    Shaky Steering

    Looking for input on my steering shaking. When driving straight I don't have much shake. When I turn the wheel maybe 5-10deg I get a noticeable shake where the steering wheel is wiggling around and you can feel it in the truck. If I turn sharper to say 30deg the shaking dissipates and things are...
  16. M

    Explain this Tire Wear

    Any ideas on what is causing this wear pattern? Seems every other lug is significantly more worn than the other (dark ones). Tires usually at 35psi, slinky stage 1 suspension with new oem bushings about 2 years ago. This is the drivers rear tire, but the others show similar patterns.
  17. M

    Measuring Alternator Output

    Hi All, I am trying to measure the amperage output of my alternator. I have a clamp on amp meter and was measuring at the main fusible link. From doing some reading, however, it seems there may be two wires that connect to the output of the alternator? One that runs thru that "main" fusible link...
  18. M

    Paint for Rock Sliders

    The time has come to re-paint my rock sliders. The rust oleum gloss paint has lasted a few years and I did a pretty quick (no primer) paint job to them the night before a trip so I can't complain. This time around I would like to strip and primer them so they hold up better. What do people...
  19. M

    FZJ80 Clicking Behind Steering Wheel

    While out night wheeling I noticed when sitting in drive with all my aux lights on there is a clicking behind the key/steering wheel area. Sounds like a relay turning on an off erratically. Nothing I can see is turning on or off. Seems to be related to a particular voltage. Turn the a/c blower...
  20. M

    For Sale  San Diego: FZJ80 Front Driveshaft

    Good condition front driveshaft from a 1995 FZJ80 Toyota Land Cruiser. U joints are tight. Approx. 160k miles. $150 obo
Back
Top Bottom