JayDoc
boop/bop/beep
That's a beaut. I think we needs more pics and maybe a source for those fender flares.I am in the progress building my HJ61 1988 for daily driving and overlanding. Greetings from Denmark
View attachment 2932425
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
That's a beaut. I think we needs more pics and maybe a source for those fender flares.I am in the progress building my HJ61 1988 for daily driving and overlanding. Greetings from Denmark
View attachment 2932425
Thx I am considering making a build tread in 60 section. The fender flares is the original FF - just painted in the body color.That's a beaut. I think we needs more pics and maybe a source for those fender flares.
I put my TT bumper on in 2015. It is the most used piece of armor on the 60. I've dragged it off of more ledges than I can count. The receiver hitch is well designed and doubles as a lift point for a High lift jack as do the recovery shackles. The 2-jerry can holder is usually empty but holds a 5-gallon Gott water cooler or a propane bottle securely. The latch that holds the swing outs has held up fine. After 7 years of abuse, a fresh coat of paint made it brand new again. I did the rattle can paint because I knew it would need periodic touch ups. The price was lower than I expected but the quality exceeded my expectations.Also interested in pricing on those bumpers.
didnt realize your rig is this nice... also thought you lived in ColoradoI put my TT bumper on in 2015. It is the most used piece of armor on the 60. I've dragged it off of more ledges than I can count. The receiver hitch is well designed and doubles as a lift point for a High lift jack as do the recovery shackles. The 2-jerry can holder is usually empty but holds a 5-gallon Gott water cooler or a propane bottle securely. The latch that holds the swing outs has held up fine. After 7 years of abuse, a fresh coat of paint made it brand new again. I did the rattle can paint because I knew it would need periodic touch ups. The price was lower than I expected but the quality exceeded my expectations. View attachment 2932516
This was before I repainted it.
What is the cost on a set?
Also interested in pricing on those bumpers.
paging @TRAIL TAILOR 2 ppl wanting pricing
Thanks. It is what it is and I do not want a different vehicle. I get to shift my own gears and do my own maintenance. I did pull the trigger on the 2014+ 4-runr brake upgrade. It wasn't much more $$ than replacing stock components. Thanks @Rustinator. But I might cuss you when doing the installationdidnt realize your rig is this nice... also thought you lived in Colorado
Turbo update, top side is done and I'm getting real close to the end. All that's left is the exhaust from the downpipe back, aux fuel pump and a couple small odds and ends. I'm pretty stoked with how it's turning out. This afternoon I got all the gauges in with just a little wiring left on them. For gauges I have boost, innovate wide band afr with data logging, and a dual intake air temp to measure the intake and charge pipe air temps, doing this out of curiosity and to see if I need to add an intercooler, which I don't want to do if I don't have to. Fyi I'm going to get a Tuffy console and move the radios so the gauges will get moved also. Too bad we got another 2 feet of snow since yesterday and it's still coming down hard. There is almost 4-5 feet of snow on the level right now so it's going to be some time before it goes on it's first test drive.
View attachment 2934023View attachment 2934024View attachment 2934025
Is that real? If so I'm going to need one, and any exterior badging that might exist!
where did you get the upgrade kit from? I need to do something like that.View attachment 2938998
My son volunteering to do the dirty work.
Waiting on up grade kit for 4-runner disks and calipers giving me the opportunity to paint the knuckles.
Front Range Off-road. They have options, but all eliminate the Backing plate.where did you get the upgrade kit from? I need to do something like that.