cruiseroutfit's latest activity

Yeah, I am sure the remaining OEM stock is going to get consumed fast! :) The OEM filter (plus the rubber seals) is about 150mm tall and the 51006 is about 107. So the OEM filter plus the gaskets - the height of the 51006 came worked out to be...

And Finn is often here on mud, @FinMcMurder

Exactly! Great gents. Steve and Finn hooked us up with this axle assembly and parts earlier this year. The axle under the 1998 was really rough and they ripped an upper control arm bracket off the axle housing.

Steve's place :-) That's where I was going to source one. LOL! Thanks, Kurt.

I also noticed the PTO winch in that ARB bar back a few posts and know how hard they are to fit into ARB bars, mine is done quite different, my truck has a 50mm body lift and the ARB bar is also lifted 50mm. I got my winch mounted right up inside...

I don't know of any threads but it should be about as straightforward as you detail, I don't recall anything odd about them. I was able to get the exact parts you mention along with the full axle from Japanese Auto Wrecking here in Utah. We've...

Hey Kurt, Do you happen to know of any thread that discusses the factory rear locker axle swap on a '98-'99 UZJ100? All I can find is threads installing them on 2000-2002 that didn't come with them. From what I can tell, it's the whole axle...

Nice work! :cool: We still have a rather deep supply of the 04152-60060 (our part# OIL60060) but soon they will all be gone as we're seeing a huge uptick in orders as inventory dwindles. I did reach out to a filter manufacture in Japan that had...

1989 FJ62. 174K miles. Solid frame. Mostly original except ARB bull bar, older OME suspension (medium, I believe), tuffy center console, WiredWagon headlight harness. Have the original front bumper in mint condition. Good interior. Repainted at...

I have some loose cable locked axles and the cable actuators in storage. I don't recall if the control cables are attached to the diffs so I can't say for sure the pins are there BUT if they are, I'm happy to pull them off and measure to see if...

Weekend plans are to wire up the OEM e-locker axle in my 1998 UZJ100. We'll see how far I get when the mountains are calling too :D

That's not oem, so it has built in shakey

Let me know what you find

CR, SKF, etc part# 99147 is the speedy sleeve for 10/27 spline F/R pinion flange or the 1pc t-case front output flange. The run ~$25 and a new flange isn't much more FLANGE...

The lens (81241-90300) is NLA from Toyota. The pre-07/80 light assembly is avail from Toyota, 81240-90300. MSRP is $72.50 so a lens @ $9.00 is perfect for many needs. I need to order a few for my personal projects. Well done!

Sure it fits but not corrected for most markets from 10/81 on. Those worked off the door as well as the switch. Believe the perimeter where it attaches to the base is the same but cover itself is different. Can see how the face angles in at the...

Send it to me and I'll happily make one

@ofer bruhis gave me one to model from. So now replacement dome light overs are available. If there is anything else you think I should make let me know. https://solvefunction.com/shop/ols/products/40-series-dome-light-cover

More CruiserTeq.com. We are closing in on the 3000 product market 😎

I hear you. It is extremely stout. I actually broke a shear pin on one pull before we setup a double line pull. (I had two extras in my spares). But it isn't a solo winch for the most part. You have to be behind the wheel and a (trained) buddy...

FOR SALE is my 1995 KZJ78 VIN:KZJ780029863 Located in Salt Lake City, Utah. I have the Utah title free and clear 253k kilometers, 155k miles 3rd row seats not shown in pics, but I have them in my basement and will include them $19,500 OBO. Open...

First, take that fox shock ( steering stabilizer) off and the bracket that was supposed to hold the steering stabilizer is a joke, its a bend tab at best. They took the center pivot out and cut & welded the two relay rods together to make a drag...

Front disc is a safety upgrade and few purists ever knock off points for those. Different locking hubs (Aisin vs Warn) and you may need to relocate the leaf perch. You will want a post october I think 1975 for the discs. 3 to 4 speed: Cruiser...

Right on, I appreciate the extra pics!! I do recall that Expo discussion. Those events are always too busy and I never get enough time to wander and look at Cruisers in the camping area and parking lot. That is where the rear Cruisers are :cool...