cruiseroutfit's latest activity

We should have the standard Dobinsons Nitro shocks in stock @ Cruiser Outfitters, we stock all the IMS too! We very regularly pair OME and Dobinsons shocks and coils together.

How we feeling about Lexus 21 years later? :D

He had staying power

Yes, the DARK theme exists, but you may need to access your Preferences to set it that way automatically. https://forum.ih8mud.com/account/preferences

Cruiser Brothers or Cruiser Outfitters. Both sell awesome kits. There was a short stretch where they went out of stock but haven't had any issues lately. Just about everything Cruiser parts related is coming out of Japan or Australia and...

Did the first trail at Cruisers on the Rockies just fine but noticed a squeaking noise. Noise got worse on the second day. Decided to jack up the front and shake the wheels before going on trail #3, and it turned out that both front wheel...

66x66mm with 11mm studs

Bit of a catch up. Lots of little items I am trying to sort of button up. Both sliders welded up and mounted, though I still need to drill and sleeve for 1/2" mounting bolts though the frame. Reverse lights wired, cheapo universal center console...

I say the same about my EX. lol. To the supercharger question, do it. Big brake kit front and rear from PowerBrake, 3.90 gearing from @cruiseroutfit, Magnuson SC, OTT tune. Can I get a oohh yeaahhh !

We would love to help @ Cruiser Outfitters! https://cruiserteq.com/chassis-teq-complete-clutch-kit-fits-1958-8-1974-40-55-w-f-engine-cl5874kit/ Rear Main: https://cruiserteq.com/rear-main-seal-fits-1969-8-1987-4x-5x-6x-f-2f-applications-egs99065/

X2 for cruiser outfitters Cltuch disk Clutch preasure plate Clutch fork boot Flywheel bolt retaining plates/tabs x3 Resurface your flywheel Rear main seal New pilot bearing New throwout bearing Cltuch disk alignment tool You'll have the 3...

https://cruiserteq.com/clutch-kits-1/

Looking for a new clutch. 1973 FJ40 Cutch/Slave cylendar is like new. Is their a check list to go by when purching parts.? Thank you! Tom

Dozens more new additions. Grey is on fire! Many 4x/5x/6x/7x/8x PTO winch parts, KZJ7x motor mounts, etc

Another vote for @cruiseroutfit 😎

They are studs. Take two nuts against each other, and you can remove the studs. Here is the kit from @cruiseroutfit

Get new ones...please. If you are investing the time, get new hardware. It will be so much easier to install. I have trouble getting the nuts off the stud without buckling a thread or two. It's just one slip of the dead blow and the stud is...

i wonder if you could just squeeze it in a vice to square the crimp again. i bought one for @cruiseroutfit a few years ago. maybe check with them for a new one if “renewing” the crimp doesn’t work. looks like the cable is in tack. just gotta...

I'll have to pull some from stock the next time I'm at the shop and take a look and see. We've sold hundreds (thousands?) of those shoes over the decades, same ones I run on my FJ40 (FF 60 rear axle), my HJ61, BJ74, etc... I've not ever noticed...

Call the guys at @cruiseroutfit Jason and Chase are A-1 and should be able to help point you in the right direction.

I’ve been through this whole rigmarole myself over the past while, on my ‘72 (12/71 build). My issue ended up being a bad set of points, but in finally arriving at that diagnosis, I touched all of the other systems you mention. I spent a lot of...

Thanks for the update, glad you got it resolved and back home! @cruiseroutfit sells a handy-dandy front bearing kit that comes with everything needed, it's a great one to have in the spare parts kit; I have one tucked under the driver's seat...

Call @cruiseroutfit Cruiser Outfitters. They're an excellent first point of contact.

All 80 series ABS sensor kits are now discontinued. 04895-60012 04895-60013 04895-60020 04895-60030 04895-60040 04895-60050

Many thanks guys, this is all good stuff. And yes, served on a silver platter @Guyute. :smokin: Late summer I'll be bringing the rig into the garage for some intensive mechanical rehab and for minor bodywork. It will be indoors for a couple...