Ok so I might have partially answered my own question. Did a little digging in the 1989 FSM, really the only mention of upper temp limits are in relation to the radiator cap and the thermostat. It doesn't address when the stock fan clutch...
Similar temps are given for the 2F except a range is given, 187-194F, and fully open at 212F with same valve lift. I couldn't find any info in the 1980 2F engine manual about coolant system limits but given the similarities between the 2F and 3FE...
Buy a Prius for your significant other. Your average household fuel expenditure drops and you still get to drive a Cruiser. Win-win, well, maybe just one win. 🤫
@murf is there an email address to directly send parts orders to?
{edit}: these guys are REALLY difficult to get in touch with. I won't go into the details, but the two times I've tried to contact them via phone to order parts has resulted in...
Let me know if this is not appropriate and I'll delete.
I've been using Andrew Toyota (Toyota Parts and Accessories Online - Andrew Toyota in Glendale, WI - https://parts.andrewtoyota.com/) in Wisconsin for a bunch of online parts orders for my...
I feel you are over thinking this, pull your speakers you want to replace and take them to a car audio store or a best buy and find some speakers that fit. There really are lots of options that fit the stock holes especially with a little...
Dropped my GX off w/ Chandler Lexus for a partial re-paint on Lexus's dime. I literally snuck in the LAST DAY of their Blizzard Pearl paint recall (?) in March. It had its fair share of obvious paint peel; got it scheduled to be dropped off...
Getting through the backlog of production delays, Dobinsons have finally released and we now have stock of the new mounting kit to fit Dobinsons hydraulic bump stops into the back of an 80 series. We aren't sure when the fronts will be arriving...
I didn't know they existed either. I'm guessing they are pretty new. I've had some square ones on order for a 62 build and we still haven't seen those.
Not real sure how I came across these lights but I'm glad I did(and we're a Holley...
We've been building hood strut kits for the 70 series trucks for a while....decided to branch out into the 60 series as we had one in the shop for a few months. Some of the parts crossed over which was great.
We're offering a hood strut kit to...
My favorite tire, I've had 2 sets of those, and a bunch of older sets of AT & MT BFG's. Works well for just about everything like Tim mentioned. Never had KM3's, but there's no question the KO2 are a better choice than the KM2s for all around...
Built up a custom 80 base front axle housing.
New CNC 4130 CrMo knuckle balls., 3.5" x .375" wall DOM, all reproduced forge stamped brackets and 10.9 grade studs. 7 degrees of caster built in.
Jason
Thanks for the video. Key parameter on Tim's review is at 10:45. Weight of the tire is key. Especially for braking. Get the lightest tire for your load range required. Lately it seems everything is load range E which are too heavy a tire for...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.