Why not just borrow the proper tools for free from an auto parts store? Are they a weird size or something?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Drag your nail over the lines and pitting and see if you can feel them. If so, how deep do they feel.
Why not just borrow the proper tools for free from an auto parts store? Are they a weird size or something?
This... If you cant feel it with your nail then you should be good. Should be something just superficial.If those were mine, I would probably hit some of that with an emery cloth before I put the hub and bearings back on.
Wrong. Use the old race UPSIDE DOWN and you will be able to remove it after seating the new race.
And why won’t the new race fully seat?
Please put the hacksaw away.
This... If you cant feel it with your nail then you should be good. Should be something just superficial.
Ok, so how bad do they feel with the nail? Do they feel deep and really catch on the nail or does it feel like a slight bump?I can feel the lines with my nail, not with my fingertips. The pitted looking areas not so much. These don't have to be replaced? I was freaking out when I saw this.
Ok, so how bad do they feel with the nail? Do they feel deep and really catch on the nail or does it feel like a slight bump?
Then do like @JunkCrzr89 said and hit it with some emery cloth to smooth it down some, clean it real good with degreaser then reassemble everything, with lots of grease and be done with it!!Not deep. It felt like a surface texture on something you might buy new that was not fully polished if that makes sense. So smooth to the fingertip, but can feel very slightly to the nail.
Then do like @JunkCrzr89 said and hit it with some emery cloth to smooth it down some, clean it real good with degreaser then reassemble everything, with lots of grease and be done with it!!