Still kicking my self for selling last 40 with 350.I'm really wanting another driver's v8 fj. Looking for anything from 8k-high teens. Obviously hight teens wouldn't /shouldn't need anything..hop in turn key and go.But the lower priced ones are fine too with minor rust ,or issues,or "history".May even consider trade of my 40th fj80 .Let me know whatcha got.Thanks-Cody. cmderrick@yahoo 828-301-6111
FJ40 | BJ40
Classifieds: Toyota 40-series Land Cruiser
Filter by prefix:
.
Filters
I am reluctantly selling my FJ40 due to a relocation with work. I am asking $16,000. I have owned this FJ 40 for 2 years and have kept it garaged the entire time. The previous owner also kept it garaged in Texas. This FJ 40 has been a real pleasure to drive and have. There is very little rust on the vehicle and it is mechanically sound. I do not have the hard top and am selling it as is with the bikini top. This FJ is sprung over and has new wheels and tires. The original F engine has good compression and the original 4 speed transmission works well. The rhino lining on the interior was done by the previous owner.
I would be happy to discuss anything more about this FJ 40 in a private thread. Thanks.
Below is a list of the...
Selling everything that is shown in the pictures (see link below) for $550. This includes the 8 point roll bar, siginaw power steering, front/rear axle, wheels/tires, knobs, etc. Most of the wiring still appears to be intact. There is no motor, transmission, or title included in the sale.
The tub has some holes in the drivers floor board, rear corners, rockers and rear sil but pretty normal wear as far as that's concerned. There doesn't appear to be any bondo anywhere on the tub and it has the original sky blue paint.
The tires hold air with the exception of the front drivers side which apears to have a slow leak.
I can help deliver for a fee if necessary.
I have nothing to do with this truck. I just saw it pop up. But for some reason it has my attention. It just looks complete. The "rust" might be terrible cancer or it might just be the light scaly s*** you see in the pictures. What do i know.
http://atlanta.craigslist.org/eat/cto/4845896731.html
1971 FJ40
Work since I’ve owned beginning in mid 2011:
Refreshed 2F installed by Mudrak(new seals, new clutch etc)
Rebuilt 4 speed(to replace 3 on tree) and rebuilt transfer case installed by Mudrak
Rebuilt Carburetor by Mudrak
New exhaust and muffler from manifold to tip by Mudrak
Shackle Reversal by Mudrak
Saginaw power steering by Mudrak
FJ60 disc brakes in front with knuckles rebuilt with Marlin HD Ecoseals.
2 new stock steelies from Toyota to clear the new discs
5 tires 31x10x15 Goodyear Wrangler Duratracs – less than 1000 miles on them
New windshield and OEM windshield gasket/lock ring
New OEM windshield bumpers on hood
Replaced dash pad with new OEM replacement
Seats torn down, padding replaced from $OR, covers from AATLAS1x...
ready for a new project and need to move this one. Body and part of the frame from a 74 FJ40 (clear title in hand), 4.3l V6, 700R4, dual cases (np241/Dana 300), cable shifters, 1 tons, 5.38 gears, lockers front and rear (Grizzly in front ARB in rear), chromolly shafts in front with drive flanges, 39" red labels, spyderlock bead locks, ORI struts, 4 link rear, 3 link front, Propane powered, trail candy gauge cluster with autometer gauges (2 not hooked up- fuel and speedo), PRP seats, Warn VR10000 winch, yellow top battery, aluminum radiator (installing a new fan this week), hydro steering with upgraded pump, lots more.
trail ready (other than the fan already pulled off, just needs to be mounted and reinstalled). Has made numerous...
Fell in love with Land Cruisers after buying my 100 series so i bought this FJ40 a year ago. I'm looking to sell it to build a camping/exploration rig. Looking for $13,000 or so. Im open for trades (FJ60/62 or FZJ80/LX450) and if in nicer condition willing to add money plus my FJ40. Heres the Craigslist ad http://dothan.craigslist.org/cto/4831971470.html
This is a bit of a feeler, and I know some of my friends are thinking I've got mental issues listing this just after "finishing" a build, but I'm thinking of selling Oliver.
I started building Oliver prior to a conversation with the wife that led to me returning to school to become a veterinarian, and knowing what my schedule is looking like for the next few years I've decided that I'm not going to have opportunity to wheel the little truck as I'd like to.
Here's the build thread: Introducing Oliver
The truck has less than 87k original miles and there's under 100 miles since being brought out of the garage after the build.
Drive train: carbureted 350 with under 20k miles, rebuilt TH350 with under 100 miles, np203/lc 3 speed vacuum...
Decent shape. Approx 105k mikes. Owned it for 14 years. Titled as an 1980 but VIN designates it as a 1979.
Nice reliable truck with some body issues. PA state safety inspection through Aug 2015. Hardtop is off but it is in nice shape. Rear ambulance doors in great shape. Best top Supertop is semi-functional but beat up.
Has the rear heater. It works.
Has radio/CD/MP3 running through door speakers and also a jeep speaker series nicely affixed to the roll bar upper hoop.
Frankly this is one of the better speaker solutions for the FJ40 I think.
Also has SOR Bikini Extreme top.
Interior is pretty nice. Some scuffs on the dash pad but the seats are in great shape.
Slight leak from rear engine seal.
Steers, Drives and stops...
It is with mixed emotions that I am selling my 1972 40 to fund another project. I have had it for about 4 years. You can see the work that I have done to it if you look up my handle here on MUD. It is all well documented, because all of you helped me so much. Thank you so much for your help and advise over the years.
I bought it from a guy in Arizona and it is an Arizona original. Since I have had it here in Kansas, I have not driven it in the rain or salt. It has been garaged every day it has been here. I truly believe it is in very good shape and very little rust and NO SIGNIFICANT rust. No diamond plate, no rust holes, no problem.
Runs, drives, and stops great.
I can send you pics of whatever you would like to see. I am...
1982 Toyota Land Cruiser - $6,250
This is a RARE 1982 FJ-40 Toyota Land Cruiser. White, less than 105,000 miles, runs great, original wheels, excellent tires, ARB Bull Bar, Trollhole Carburetor, front disk brakes, four speed transmission, 4X4 works great. Front seat upholstery has been replaced. I hate to sell it but I have run out of room to store it.
I have the doors, no top.
No texts. Please check out link for additional photos. I will not separate the ARB Bull Bar from the Land Cruiser. I am not interested in trades.
Bring cash if you want to drive it.
ADDITIONAL PHOTOS
https://plus.google.com/photos/109286494062694893062/albums/6100861238064453169
843-856-4600 - Ask for Blair
As stated in above listing.. Looking for a built Proffitt's Cruiser for sale.. Would like to see if I could get my hands on "Bid Tex".
Thanks,
Tyler
Toyota fj40 Land cruiser 1974, Great shape. Orig. six cyl. 4 speed, Too long of list to put on here what new parts it has. I have never had this in the mud, only taken to car shows. Location Monroe County, Hamilton, Ms. $18,000
Well, technically I'm the very new second owner. My wife spotted this truck and sent me a pic while I was in Korea a few months ago. Fast forward, As soon as I got back, I went by the residence and left a note. No call back. I then asked a friend that lived in the neighborhood to try and contact the owner. It worked and a conversation and trip to the residence later, I bought it.
I bought a September 1979 Freeborn Red FJ40 from the original owner. He bought it new from the showroom floor in Atlanta back in early 1980. The truck was used on the gentleman's farm in north GA when he and his wife would go there from Macon. Around 2008, the truck somehow rolled back down their steep driveway and the passenger door while open...
I'm looking for a 5.3 or 6.0 powered 40…or even a fuel injected SBC 350 will do….just a fuel injected V8 40 series that I can't see through the holes in the body. I'm planing on a 1 ton swap, so axles aren't important….any any location will do. The plan is to make a driver,1 ton V8 cruiser..in the 100-109 WB range…so the better the candidate, the more inclined I'll be to purchase it. Or if you know of a 1 ton swapped ring with a 1F or 2F that could work as well for a motor swap. Something I could drive home would be preferred…..Range of 10k-30k depending on what you got!
Have a 1941 Ford COE that I will never finish, lost interest, interested in FJ 40,45 parts of same value in trade. If you are interested in conservation of such, PM me and I can go deeper of what I have with many pics to show and where it is as of completion and many custom parts that have already been fabed .
1-13-15 - SEE UPDATED POST BELOW and CL ad:
http://dallas.craigslist.org/ftw/cto/4829118135.html
_-----------------
I am offering for sale my 1969 Camaro X-11 Pro Tourer. Please read all of this carefully before contacting me.
Mechanically it's new front to back with the best of everything. Needs some sorting still... carb adjustment, rockers readjusted, timing set properly, probably a dyno tune, coil overs and sway bars still need a bit of adjustment. Engine/trans probably have 200 miles since install.
I've done quite a bit to this car. Recently installed the new grille, carbon fiber frame braces...things like that. Engine/Trans done in early August 2012.
Highlights:
Engine:
400 SB .030 bore 406 cu in
Parrallel decked
Align...
Hi,
I'm looking for a FJ40 from 1983 that is for sale. I prefer if it hasn't been restored, as I plan on doing the restoration myself.
Anyone has one for sale or can help me find one?
Thank you,
Lazaro Suarez
305-796-4276
lazaro@forkliftsparts.com
- Locked
Looking to sell my 1972 FJ40. Got 2 cruisers but can only afford to spend on one so this one has to go. See my listing here:
http://atlanta.craigslist.org/nat/cto/4821617976.html
Hello MudderMudders,
Was scouring the classifieds as usual and came upon this 80 FJ40. Called the guy and he seemed like a straight shooter. He told me he is looking for 13-15k....
He'd probably take 10-11k
Looks solid and fairly clean in the pics. I don't have it cuz if I did I would probably be driving up to check it out. Passing it along in case any one is on the Hunt!!
http://losangeles.craigslist.org/sfv/cto/4813715193.html
I have a clean Indiana title and vin plates for a 1980 FJ40 Toyota Land Cruiser that I parted out. If anyone is interested, let me know. I have the frame as well. This would make the perfect custom build. New frame and aluminum body. With this title and vin plates you are legally the owner of a 1980 FJ40.
Not mine, however looked pretty interesting, maybe worth a call for someone looking past the junk people are trying to get rid of for the same $.
http://inlandempire.craigslist.org/cto/4817993353.html
and for sale. Don't really know protocol but one is listed on Chattanooga craigslist and the other listed on Atlanta craigslist. I bought these and another 76 within a month of each other and need to free up space and money. I'm relatively new to this but happy to answer any questions that you have.
Thanks
