Would a -25mm offset wheel work on a Land Cruiser

[Tummler]

I am clueless when it comes to tires and wheels, and I was wondering if this wheel would work with a 100 Series.

FN Wheels – FN Wheels Five Star

From searching the forum, I am inclined to think it won't since it appears the factory wheels have a positive offset of 30mm, correct?

 

[reznunt]

Lots of poke with -25mm. I think factory is +60.

 

[HaiiroKuma]

I am clueless when it comes to tires and wheels, and I was wondering if this wheel would work with a 100 Series.

FN Wheels – FN Wheels Five Star

From searching the forum, I am inclined to think it won't since it appears the factory wheels have a positive offset of 30mm, correct?

Nope! The mounting plate of the rim would stick out over 3 inches further than oe. A +25 would work though. The most I would go is the tundra offset at +12. Fyi the factory offset is +60. Hope this helps.

 

[Ahimsa]

You might also try this site which may help you determine if it would fit. Toyota Land Cruiser 2001 - Wheel & Tire Sizes, PCD, Offset and Rims specs
from what I was seeing it seems that the range was -25-60. I think the vendor could also tell you.

 

[Ahimsa]

Of course the other thing to note was the rim you linked is a 6 lug. My 01 is 5 lug so you might want to check that as well.

 

[brandon12777]

+25 is fine, it's what I run.

 

[bozncsurf]

honestly - tire size comes into play with any offset so the answer isn't exactly black and white.