Wire color code (1 Viewer)

[madmax200]

Hi, can u guys help me with the diagram color codes of the push start button. Tnx

 

[chimyz]

Model year?

 

[madmax200]

Hi, my lc200 is 2014.

 

[jcmiro]

Out of curiosity. What are you planning to do

 

[madmax200]

My plan is to put a cut off switch to the ignition

 

[gaijin]

Why not just put a switch on the wire to the switch on the brake pedal? It's a much simpler switch, easy to get to, and the car won't start if the brake switch circuit is not complete.

HTH

 

[madmax200]

Hi gaijin, I have check to brake wires and there are 4 wires with the connector which wire should I make the cut. By the way tnx got the infos.

 

[gaijin]

I'm sorry, I don't know. But if you can find the one that is hot (conducting current) when the pedal is depressed, that's the one on which I would install the switch.

HTH

 

[madmax200]

Ok tnx again for the tip. Have a good one!

 

[boobook]

Disabling the brake wire won't really help as a way to disable the ignition button.

You can start the vehicle without touching the brakes by pressing and holding the start button for 20 seconds.

This might help
http://www.moranbahweather.com/toyota/ewd/index.html

 

[619TOY]

While I don't recommend cutting any wires in your vehicle without the necessary skills, knowledge and first verifying their function with a quality DMM, maybe this will help. Obviously I assume no responsibility for the accuracy of this information, yada, yada...