dubyahard

Did about 40miles of tight technical trails today. Made it up to about 11.5k feet. I pulled out 1 Tacoma on 33s, 2 Jeep’s and this one worth sharing. I completely understand bashing drifts is 80% driver competency but we thought it was funny...

Beach all to myself !

Wrapped the chrome door moldings.

The spacers are the easy part. 4crawler.com The radiator brackets are the more custom thing. But if you ask really nicely, you might be able to have a member make you a set.

Howdy, I’m Devon. These are my two! I’m located down by Pagosa Springs.

So is there a source for body lift spacers?

This week I put on a set Perry parts AHC-specific bump stops. Combined with the black spring rubbers, I feel like I’ve unlocked the ride I’ve been looking for. The spring rubbers themselves were maybe a 50% improvement in dampening but I...

O man, how I enjoy burning dinosaurs. Here's the risk that's playing out for me. My wife's Tesla is such a game changer. It's not the faults that bother me, and it's fun and effective in its own right. The problem is it highlights...

Mother’s Day outing in Central Oregon. Gorgeous day

E&E Off-Road (@turbo8) rear bumper installed.

Trail Creek, an hour outside Ketchum, ID.

Installed the Slee slider steps I got from a local mudder. Took me about 4 hours with some help from my friend at the end. Much easier to do this job on my lift with a friend....

Out and about at Penrose Commons.

2019: Three Forks in SE Oregon 2019 Alvord Desert 2020 near Barlow Trail, OR 2021 Baypoint in OR 2022 near Barlow Trail, OR 2022 Roberts Bottom on the Dolores, UT

I agree its very possible to do 37s without much metal fender mods. Wheel offset is key. Especially as 37s are often full width. IMO, +25 is too low as that's going to eat fender, requiring limiting of up-travel, fender trimming, or both...

2008-2010 are still rated at 8500 https://forum.ih8mud.com/threads/lx570-towing-why-did-it-change-from-8-500-to-7-000.1145696/

This thread is dangerous. My sheet metal is already scratched and pinstriped and pock-marked so, trimming some, or a lot, doesn't frighten me. I just don't know how to finish it - roll it and paint? What about the fender liners? Also, 4.88s are...

Thanks to this thread and @MTKID ’s build thread, I was able to stuff 37s in. There’s definitely a wealth of knowledge here. Currently I’m on stock AHC with just a sensor lift. No body lift. Trimmed the front fender up about 1.5 inches but it...

Is anyone headed to Austin, Texas from Denver or Colorado Springs area anytime soon? I need to transport a fridge back to SnoMaster. Let me know if this should be posted elsewhere. (this was previously posted in Chit Chat b/c I was unaware of...

Droopin’

Got lucky and scored a very lightly set of used Slee step sliders locally! Going to head over to Slee shortly and pick up whatever hardware I need to mount them...

New Shoes. Yoko G003s. 285/75/18