Again; You need a ROTF or a build thread.jodo said:
Wild Wheeling Pics (1 Viewer)
- Thread starter General
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
How bout another video... this was after I got the new MetalTech Sliders to test out for the magazine writeup. Off the Isabel trail.
Stock cruiser, balding tires, locked.
http://www.youtube.com/watch?v=nylcIBoKdGw
Stock cruiser, balding tires, locked.
http://www.youtube.com/watch?v=nylcIBoKdGw
Last edited:
jvazquez53
El Tractor
- Joined
- May 6, 2007
- Threads
- 352
- Messages
- 3,413
- Location
- San Juan Puerto Rico
- Website
- www.facebook.com
jvazquez53
El Tractor
- Joined
- May 6, 2007
- Threads
- 352
- Messages
- 3,413
- Location
- San Juan Puerto Rico
- Website
- www.facebook.com
The only "wild wheeling" done recently was this... Yes three out of four tires broke the bead, and one rear axle busted seal. After all it was 90% river crossings.
Last edited:
Tapage
Club 4X4 Panamá
that deep without snorkel .. my respect !
chapel gate
GOLD Star
where is that toby, the peak district?
how much lift on that 80?
jvazquez53
El Tractor
- Joined
- May 6, 2007
- Threads
- 352
- Messages
- 3,413
- Location
- San Juan Puerto Rico
- Website
- www.facebook.com
Here's a couple from the first annual "Cruiser Fest" at Miller Motorsports Park in Tooele (too-WILL-ah 
)
Not hugely extreme by any means, but way fun. The second and third pics were taken by a nice guy named Jason Day.
)Not hugely extreme by any means, but way fun. The second and third pics were taken by a nice guy named Jason Day.
Do you remember the air pressure you were running? How much do you run now? I guess I'm a little skeered of being alone in the woods with a tire off the bead -- don't want to know if the "ether trick" really works (but I carry it)
Do you remember the air pressure you were running? How much do you run now? I guess I'm a little skeered of being alone in the woods with a tire off the bead -- don't want to know if the "ether trick" really works (but I carry it)
Back in my earlier wheeling days, we were out trail-drinking (I said early days!). I got to witness one of the hillbillies we were with blow 3 tires off the beads and ether them back in record time. He was tanked too. He hd a 350 Chevy in an S10 and liked to put air under the truck. The best part of that trip? The guy that did it's name was Bo and his cousin Luke was in another truck. I kid you not! I got a couple pics from that night somewhere I should scan in.
I just watched a guy ether one back a few weeks ago. Took him a few tries to get the eher amount right though. Not Bo though. He got it right all 3 times.
jvazquez53
El Tractor
- Joined
- May 6, 2007
- Threads
- 352
- Messages
- 3,413
- Location
- San Juan Puerto Rico
- Website
- www.facebook.com
Do you remember the air pressure you were running? How much do you run now? I guess I'm a little skeered of being alone in the woods with a tire off the bead -- don't want to know if the "ether trick" really works (but I carry it)
I ran 15 PSI, too low for my rims and the trail, (found out too late). We could not use the ether trick because the valve stems were ripped off by the mud. The trick works, some of my friends had done it. The valve stems now all four are new and the steel type.
You talking to me I assume? 2.5 OME lift, Heavy's front & rear. ~33" tires.
Probably belongs in a new thread: Worst Stuck! Sorry if this is a hijack! My come-along was not up to the recovery,
so I now have an ARB Magnum hand winch...
so I now have an ARB Magnum hand winch...
Oh man.. How much water did you get in the cab???
jvazquez53
El Tractor
- Joined
- May 6, 2007
- Threads
- 352
- Messages
- 3,413
- Location
- San Juan Puerto Rico
- Website
- www.facebook.com
Probably belongs in a new thread: Worst Stuck! Sorry if this is a hijack! My come-along was not up to the recovery,
so I now have an ARB Magnum hand winch...
Now, this look worst than mine!
PS: Love those white Cruisers!
