Wheel Compatibility (2 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Adventure Teq

SILVER Star
Joined
Feb 1, 2002
Threads
97
Messages
3,321
Location
Liberty Utah
Website
www.instagram.com
2000 UZJ100, Wheel Specs: 16x8 5x150mm

Aside from LC wheels specifically does anyone have knowledge of compatible wheels from any other trucks, Toyota or other?

I'm in need of a spare wheel/tire as mine wasn't included when I got her. There are countless threads discussing swapping LC wheels from year to year and a lot of good info for the specs of the various wheels.

In other words does anyone have any suggestions for an affordable option to the $160 and up wheels that I can only find to be 450+ miles from Ogden? Something more along the lines of a $60 salvage yard steel wheel from a Tundra or something... Anyone got one for sale nearby?

Thanks!

Jeremy A
 
I think I got my fifth 18" from eBay for like $75 shipped. Hard finding a single on CL, usually 4. Although you should be able to get a set of 4 for under $200 if local. 07+ Tundra is the most common cheap alternate.
 
I think I got my fifth 18" from eBay for like $75 shipped. Hard finding a single on CL, usually 4. Although you should be able to get a set of 4 for under $200 if local. 07+ Tundra is the most common cheap alternate.

Does the center cap off 07+ tundra fit 98+ LC? Then it would be an easy soirce as the ebay has tons.
 
the front hubs stick out further on the LC. have to use your stock center caps. I have '08 tundra wheels with LC hub caps.

The back ones should fit though.
 
Hawk driver, weird coincidence, I just bought mine in Salt Lake and it didn't have a spate either. Please let's know if you come across a good local source or just end up going with eBay


Sent from my iPhone using Tapatalk
 
Hey HawkDriver, don't know if you're still looking for a 16" LC rim, but there's a guy off on 500 West about 3550 South who i just got mine from for $100. He had a few more there. Name of the place is BTI Wheels.

I put it on for fit tonight and it fits correctly, looks a little different than the ones I have on, they're chromed and this one is more of a matte finish. I'll be putting a tire on it tomorrow and then I won't have to drive around on borrowed time anymore :)

BTI Wheels
3594 S 500 W, SLC
801-747-0566

Hope that helps....

-B
 
I've still got 3 Tundra wheels in Seattle. I bought 4 to get my spare. Haven't been able to sell the other 3. Let me know if you're interested.
 
I think I got my fifth 18" from eBay for like $75 shipped. Hard finding a single on CL, usually 4. Although you should be able to get a set of 4 for under $200 if local. 07+ Tundra is the most common cheap alternate.

If you need a set with TPMS sensors

Cheap and near you.

Shane

image-1090232572.webp
 
I just wanted to confirm that 4 18x8'' Factory alloy wheels from a 2014 Toyota Tundra would work on my 2001 Lexus LX470. Thanks for the help! Probably a dumb question...
 
On the center caps, am i understanding this thread correctly that I can use the center cap from my oem wheels? Or will i just have to leave the center caps off?
 
On the center caps, am i understanding this thread correctly that I can use the center cap from my oem wheels? Or will i just have to leave the center caps off?

If you have OE LC caps, they will fit Tundra wheels, although they leave a small gap which most people would never notice. When mounted on the LC, the Tundra caps will only fit the rear. The front hubs stick out too far. If you run wheel spacers the Tundra caps will fit all four. The Tundra cap, does make a nice trim piece for a bumper mounted spare.
 
I got the 18" Tundra whlz As a back up set and I cdnt get the front caps to fit or my lx caps either. Tried cutting a hole out for the hub and one tundra cap barely fit and the other hits the hub bolts and won't go on...
 
ImageUploadedByIH8MUD Forum1428283932.445087.webp
 
ImageUploadedByIH8MUD Forum1428283981.912883.webp


Thought just occurred to me that If I ran a spacer up front I'm sure the cap would fit!
 

Users who are viewing this thread

Back
Top Bottom