- Joined
- Oct 22, 2002
- Threads
- 168
- Messages
- 5,359
- Location
- Durango, Colorado
- Website
- www.durangomagazine.com
I've promised to leave it stock... But she approved sliders, so that and the largest AT tires I can stuff in the wheel wells without a lift.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
And a winch. And of course skid plates. But then totally stockI've promised to leave it stock... But she approved sliders, so that and the largest AT tires I can stuff in the wheel wells without a lift.
well yah.And a winch. And of course skid plates. But then totally stock![]()
My plans are similar. Good sliders reduce door dings, so that's a must. (I need to find better pictures of the stock ones, I don't think they stick out very far.) Over the weekend I saw a video with a Toyota Engineer saying the GX and LC are designed to fit 33" tires stock and in general should not need any cutting to fit larger tires. That was good news to me, I'll put 33" somethings on there first thing. (Video: My Next SUV Build? Parked Side-By-Side: New Lexus GX vs Toyota Land Cruiser!)I've promised to leave it stock... But she approved sliders, so that and the largest AT tires I can stuff in the wheel wells without a lift.
That's encouraging, I know there was a shop test fitting 34s with a 0 offset wheel. So maybe 33/34s with 35mm offset wheels will be on point!My plans are similar. Good sliders reduce door dings, so that's a must. (I need to find better pictures of the stock ones, I don't think they stick out very far.) Over the weekend I saw a video with a Toyota Engineer saying the GX and LC are designed to fit 33" tires stock and in general should not need any cutting to fit larger tires. That was good news to me, I'll put 33" somethings on there first thing. (Video: My Next SUV Build? Parked Side-By-Side: New Lexus GX vs Toyota Land Cruiser!)
- Dark tint
- 33s/34s with smallest wheels possible. Black or bronze
- Maybe black roof wrap?
- Eventually sliders/armor. Maybe.
Otherwise it'll stay stock. Locked with good tires will get me more places than I need to go.
Toyota has stock sliders on the first edition LC. I doubt they would do anything that messes up side impact protection.3. I was gonna do sliders but learned here that those affect or could affect side impact protection to passengers, so decided I will not.
If toyota put better ATs on their trucks, I would. However toyota seems set on putting on what are essentially highway tires. I wish they would at least use the OT tires. Regardless my truck will get Falken AT3Ws of the 33/34 variety and I'll call it a dayI recommend everyone who’s buying one of these to drive it as is exactly as it came from the dealer - with the smaller tires. Until you develop a muscle memory (so to speak) as to how the vehicle should handle on the road.
Then once it’s super familiar after a few month- THEN install bigger tires if that’s your plan.
Then you’ll always have a baseline for comparison in your memory : Stock vs Modified.
“It used to handle a lot better….”
If toyota put better ATs on their trucks, I would. However toyota seems set on putting on what are essentially highway tires. I wish they would at least use the OT tires. Regardless my truck will get Falken AT3Ws of the 33/34 variety and I'll call it a day
Toyota has stock sliders on the first edition LC. I doubt they would do anything that messes up side impact protection.
Good advice. There will be a lot to learn about these trucks, and their engineering, by driving them bone stock. I expect that people new to Land Cruisers will be surprised by how plush and planted the stock suspension, wheels, and tires feel. That said, it was reassuring to recently watch an interview wherein one of the engineers flatly said that these trucks are engineered to accept 33” tires.I recommend everyone who’s buying one of these to drive it as is exactly as it came from the dealer - with the smaller tires. Until you develop a muscle memory (so to speak) as to how the vehicle should handle on the road.
Then once it’s super familiar after a few months- THEN install bigger tires if that’s your plan.
Then you’ll always have a baseline for comparison in your memory : Stock vs Modified.
“It used to handle a lot better….”
“It used to stop a lot better…”
“It used to accelerate a lot quicker…”
I’ll sell you my first edition slidersLets hear the ideas you all have in your head for mods you wanna do when you get your new Land Cruiser.
I am looking to get the 1958 edition and do the following to it:
33" all terrains
Wheels with better offset
Rock sliders
Steel front bumper or semi-bumper
1" coil spring spacers in the front and 1/2" in the rear
Full Focal audio system
Full sound deadener
15% tint all around
Expel film on rock chip vulnerable areas
Forgive me is someone has mentioned this already but does the front bumper seem like it would be difficult to design an after market replacement like we are used to seeing for previous models. Seems to be in multiple pieces and I can't stop looking at those two square shapes on each side. Anyone else agree?
Yeah someone ought to be able to do better than that....![]()
Aussies lining up for new Toyota Prado - carsales.com.au
Long queue expected for next-gen Toyota Prado ahead of its mid-2024 local release; turbo-petrol hybrid version could come laterwww.carsales.com.au
This was all over aus articles and review very early. Not a particularly good looking bumper. But it is a front bumper.