What have you done to your 4x4 lately 2021? (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Been working on seat mounts to put Honda prelude seats in the 73. Been tricky as I want them lower than stock and further back.... here is version 3. Stock seat far back position on the passenger side and new honda on the driver side. Got it about 1.5" down and 4" back.... I am going to pull out the rear seats anyway for a big camping box pull out, so legroom is not a concern for the back seats.

64900CCC-0F0B-42C7-83D3-E306362BBA9D.jpeg


0E7D3154-2BD7-411F-9D0E-AE7307C845E6.jpeg
 
Installed a remote start in my girlfriend's Highland. Not a cruiser, but to her it's like her baby cruiser. And she LOVES the remote start. I scored big with that one.
 
Got the prelude seats and the Tuffy box installed in the 73.

0724992E-68D6-4512-98BA-000F7CBFDC35.jpeg
 
Been working on seat mounts to put Honda prelude seats in the 73. Been tricky as I want them lower than stock and further back.... here is version 3. Stock seat far back position on the passenger side and new honda on the driver side. Got it about 1.5" down and 4" back.... I am going to pull out the rear seats anyway for a big camping box pull out, so legroom is not a concern for the back seats.

View attachment 2545043

View attachment 2545044
I like how you made the lowering brackets around that hump. Clean as always!
 
I just bought a bunch o-rings for a 100 rear actuator. bet they carry over. 10 piece min still only spent $12 on 40 silicone o-rings.
I bought enough to do 10 lockers, I'm guessing others will want it done.
 
Little body work and paint over the weekend. Maybe a couple weekends.

45Back1.jpg


windshield 2.21.2.jpg


windshield 2.21.3.jpg
 
Pulled the motor out of the 04 LX. View attachment 2593532
Was that the original plan? possible the same amount of time, plus hit the rear main, and just do the trans pump housing oring and input at the same time. might as well. you'll be good to go for a long time.
 
Brakes got shiny... oops. Now shinier....

5AB3ED54-4E0B-461D-AD0B-87EE8B40E64D.jpeg


520A1061-99A3-4380-9BBB-BD048A7C6389.jpeg
 
Was that the original plan? possible the same amount of time, plus hit the rear main, and just do the trans pump housing oring and input at the same time. might as well. you'll be good to go for a long time.

Well the original plan was for my spark plug sleeve to work. But it didn't :( So now it's getting the full 260k mile service.
 
bling, bling.

8F48ED4E-A77D-4670-BD60-A071F772F926.jpeg
 
Not the cruiser, but still 4x4. Getting 4.10 Nitros installed by @cjmoon in the "Hugo" as he called it. 🤣 Should be better equipped to pull the rig and trailer and accommodate the lift and tires for grocery getting!

636916167.jpg


IMG_5914.jpg


IMG_5919.jpg


IMG_5920.jpg


IMG_5922.jpg
 

Users who are viewing this thread

Back
Top Bottom