What have you done to your 100 Series this week? (32 Viewers)

[a31gun]

Rebound Pro udate.
I was recommended to use vicon o rings. Was told the Chinese Icon rubber doesn't last. $10 for 100. I used dielectric grease on the rings. Rattle can anti-seize with a hole in cardboard helped a ton with how messy the stuff can be. It also kept it off my o rings.

 

[Rustyamigo]

Replaced rear lift supports.
Installed Jensen 7 inch CarPlay and back up camera. Installed k&n air filter. All weather floor mats and Ordered seat covers!

 

[98hundy]

OEM

Got to

 

[1999WhitePearl]

Slee Stainless Brake Lines and flushed out fluid that’s no telling how old. Stopping is like a new truck now

 

[menancyandsam]

Installed a Pecron car charger to keep my power station top off via the alternator.
It outputs up to 500w, but I have it dialed down to about 400w. Has a smart voltage so it won't deplete your starter battery. And it's plug and play.
Only downside are the loud fans, need to see if I can replace with lower db's

 

[zgfiredude]

Installed a Pecron car charger to keep my power station top off via the alternator.
It outputs up to 500w, but I have it dialed down to about 400w. Has a smart voltage so it won't deplete your starter battery. And it's plug and play.
Only downside are the loud fans, need to see if I can replace with lower db's

View attachment 3632005

View attachment 3632006

How do you like that charger so far?

 

[77pantera]

Swapped out the stock size highway tires for 275/65/18 (32's); Copper Discovery ATP's
I know, like everybody else I would have preferred 275/70/18 (33's), but I already had 5 of these, they are 4 years old, and have under 10k on them. May as well use them or loose them. So robbed them off the LR3 and put them on the hundy. Between them, the running board delete, and trimming the rear mud flaps, finally losing that mall crawler look.

 

[menancyandsam]

How do you like that charger so far?

I'll be going on a trip this weekend, so will see. Testing I can get 500w but I lowered it for now to about 400w. That 4-5 times what you can get via the cigarette lighter connection.
Easy install and at $150 makes it an easy investment.
Only negative is the fan noise, I'll have to see it I can swap out to a quieter fan.

 

[a31gun]

35 10.5 tires fit well. Very happy with end results. My clunk is completely gone thanks to OEM cv's and flanges. I used to grit my teeth shifting into D and R. New rack cured my sloppy steering and Highway wander.

Threw on some ebay corner lights I bought 4 years ago. I should have installed long ago. Faded lens and orange looked dated.

 

[OEMGUY0720]

Nothing major, just some s for summer.

 

[bozncsurf]

Nothing major, just some s for summer.
View attachment 3632791

This looks great with the open 5 spoke window. Tow points next?

(your wheels always make me want center caps)

 

[xeuxaz]

I only had time for the glovebox and a sticker worth 10hp. Hoping to do the Washer reservoir this weekend maybe.

 

[OEMGUY0720]

This looks great with the open 5 spoke window. Tow points next?

(your wheels always make me want center caps)

I have the ironman front tow points that’s red, you just gave me an idea
but I saw once here, not sure if it’s Jason of TT selling it but it’s aluminum billet soft-shackle friendly tow points -just can’t find it anywhere NOW those are really nice.

My NAPA outer CV clamps was showing little cv grease so while I have access in the IFS I retightened those clamps.

 

[Zuberg]

I have the ironman front tow points that’s red, you just gave me an idea
but I saw once here, not sure if it’s Jason of TT selling it but it’s aluminum billet soft-shackle friendly tow points -just can’t find it anywhere NOW those are really nice.

Soft Shackle Tow Points - 60 80 100 Series

Toyota Land Cruiser Designed for 60, 80 and 100 Series, or anywhere you have a 60mm bolt pattern to fasten 1/2" Grade 70 is laser cut and CNC bent for accuracy Standard 1" hole is laser cut and accommodates steel shackles Also available is CNC mill radiused 1" hole with smooth finish to...

trail-tailor.com

Jason has an option for soft shackle on that page. Not sure if those are the aluminum or not though.

 

[cruisin4bruisins]

Nothing major, just some s for summer.
View attachment 3632791

easy +50 horsepower right there

 

[ericbauer]

Pulled off both steering knuckles today ... to repack wheel bearings & more importantly replace the original drive flanges & LBJ after 417k miles ...

As usual, one side takes all morning & the other side is bish bash bosh job done in less than an hour ...

Pressing LBJs and re-assemble tomorrow

 

[climbernyc]

Realized the factory LX cupholder adjusts!

 

[MaineiacMoose]

Finally got around to wiring in some new to me seats from a parts LX. Turns out the 04 and up use a different harness so it was fun. Also installed a slee battery tray and picked up some used tundra wheels to refinish this winter. Trying to get this thing ready to go to Cruisers on the Rockies in July.

 

[99UnDaCuvaBrutha]

new Interstate battery from the big box store.

 

[cruisin4bruisins]

Guys... this means my CV Axle is in good shape right?