Wanted: 80 series Depo bulb shield

[COS80]

Hello. I need a bulb shield for an 80-series Depo headlight (I bought an 80 and it came missing the one on the passenger side). I've been told these aren't sold by Depo, so I'm hoping maybe someone out there has a junk headlight they can pull one out of for me.

 

[COS80]

bump

 

[COS80]

bump

 

[COS80]

bump

 

[White Stripe]

Time a projector conversion

 

[COS80]

Time a projector conversion

Got any links to a how-to? I'm trying to find one here but not having much luck so far.

 

[White Stripe]

Got any links to a how-to? I'm trying to find one here but not having much luck so far.

This is for a 4runner, but very similar. Keep in mind you'll have to add a slee headlight harness.https://www.toyota-4runner.org/3rd-gen-t4rs/213100-budget-build-retrofits.html

 

[COS80]

This is for a 4runner, but very similar. Keep in mind you'll have to add a slee headlight harness.https://www.toyota-4runner.org/3rd-gen-t4rs/213100-budget-build-retrofits.html

I didn't realize they just fit through the existing hole in the housing... I was under the impression that the rear housing had to opened up with precise cuts. I think I'm going to do this! I just need to identify the right projectors for LED use.

 

[White Stripe]

I didn't realize they just fit through the existing hole in the housing... I was under the impression that the rear housing had to opened up with precise cuts. I think I'm going to do this! I just need to identify the right projectors for LED use.

It's one of the best upgrades you can make.

 

[COS80]

I assume you've done it... did you go HID or LED? Any recs on the equipment?