" Small Business Store Front Open ! "
If u need Lock & Key service Including SST Machine Cut Keys to your Factory Code
Your in The Right Place .........
---------------------------------------------------------------------------------
___
__
Welcome to the Small Business Store Front
for
Rising Sun Mechanical
Lock & Key Service, Cylinder Repair Factory Code Cutting SST Machine Re-Key & Re-Coding Service
Vintage TOYOTA LOCKSMITH Specialty SHOP
T-TEN Program Graduate, Certified & Trained Master Tech.
Circa. 1998
Lock & Key Cylinder Service
&
Repair's, Factory SST Machine Code-Cutting Service
Re-Key & Re-Coding of ANY TOYOTA LOCK
What we do :
Update 10/10/2019 :
We now Cut By The Factory Key CODE 1992- Later
TR-40 TR- 47 FJ80 Series , FJ100 Series
- Make Fresh Crisp Sharp OEM Toyota First Generation Double sided ( 1973-1991 ) Key's Cut to your Vintage Toyota Vehicle's Unique Factory Key Code you provide us
( this is commonly refereed to as a TR-33 or X137 key blank at a hardware store )
- Re-Key & Re-Code : NOS , New & Good condition Used Vintage Toyota Ignition & All Door Lock cylinders, including Fuel doors to Your key code and or a Good condition working Master Key you Provide us
- Make every effort to repair a broken Lock Cylinder with the NOS repair parts inventory we still have available to us on hand , but keep in mind age & time cause corrosion & excessive free-play wear
- The Cylinder either can be repaired or it can't , there no such thing as rebuilding or refurbishing a Vintage toyota lock cylinder , the best ones that Can be repaired are the ones that have used the Least amount of times in there life ..........
- Your Factory Key Code for a 1975-1998 Vintage Toyota vehical is stamped on the Inside of the passenger side door Lock cylinder Only , it is NOT stamped anywhere else , you must Remove the Lock cylinder Completely , take photos of ALL the stamped numbers on it and send me a PM with the Photos attached , this way together we can decipher the hand stamped numbers and letters & Double Verify we have the Correct Code sequence
- Except the Original set of New Keys your Vintage Toyota was sold with New at the Dealership , CODE was stamped on the side of the shaft , Please see example below K0420 or W1234
- on 1973-1974 Land Cruisers there is NO Double sided key code stamp on the Land Cruiser due to the single side driver side door lock set up and double sided ignition & fuel door set up
---------------------------------------------------------------------------
11/24/2019 We are Very SAD to Report :
- We NO LONGER will be Code cutting the First generation Single Sided type
Keys 1956-1972 , TOYOTA discontinued ALL the Factory Blanks and Aftermarkets ones DO NOT WORK Well Enough to Continue our passionate Work ......
-------------------------------------------------------------------------
Last edited: