Tranny to Transfer case bypass hose

[shipmag]

Just got 4 hoses in first ones to pay get them $55.00 each. These are all 12.75. This is the last group buy. These are also listed on ebay for buy it now for $77.95. Pm me for
Paypal instructions.

 

[shipmag]

Now I have three hoses left. Send me a pm if your interested.

 

[kruisinkid]

12.75 is for NON split case like in a stock 78 fj40?

 

[shipmag]

The 12.75 length hose is for stock 4 speed transmission and a one piece transfer case. To be sure it fits your drive train i would recommend you measure the distance from the center of the transfer case and transmission to make sure it fits.

 

[WTREXPLR]

1977 fj 40 4spd

P.M. sent 1977 pic. measured 13" so 12.75" should do the trick. Excellent work and thanks for your time.

 

[shipmag]

I have one hose left. First paypal to me gets it. Pm me before you send a paypal to make sure it hasnt sold.

 

[WTREXPLR]

Got my hose and found some time to get ur on... very nice job thanks again fits great.

the hose is a little stiff but can be moved if you wanted more room. clears beautifully. Got to add also even with a new seal, its a good protection to have anyway, not hurting anything, Great advice (from page 1) thank you...

 

[Waterboy]

I have one hose left. First paypal to me gets it. Pm me before you send a paypal to make sure it hasnt sold.

Sent a PM.

Sent from the islands.

 

[shipmag]

Group buys all closed thanks for the support.

 

[duffontap]

Group buys all closed thanks for the support.

Thanks for doing this shipmag. Love my bypass hose!

Question for guys who have been running various bypass hoses for a longer time now: have your oil levels stayed even? Considering that the bypass hose will allow the pressure to equalize between the two units, I'm wondering if the oil will start to slowly follow gravity and leak back through the worn splines/damaged seal down into the t-case?

 

[broth9640]

Any chance you will be doing another run of hoses in the future? If so mark me down for one.

 

[shipmag]

if 5 people wanted them I would do another one but 5 is the minimum manufacture will do. I am not advertising or promoting it any more too much work. Your more than welcome to promote it and try to get 5 people to do it.

 

[duffontap]

Here's a tech question I'm still pondering:

Question for guys who have been running various bypass hoses for a longer time now: have your oil levels stayed even? Considering that the bypass hose will allow the pressure to equalize between the two units, I'm wondering if the oil will start to slowly follow gravity and leak back through the worn splines/damaged seal down into the t-case?

 

[CarDude]

Any chance you will be doing another run of hoses in the future? If so mark me down for one.

With all the oil leaks I have I think I will need one .so count me in for one. Three more to go.

 

[shipmag]

Ok if three more do it i will agree to put together another group buy.

 

[sfd60]

How much are these? I have 2 60's and a 40 I would be interested in this

 

[shipmag]

They are 55 each that includes shipping. They are 12.75 inches long. Be sure to
Measure before ordering to
Make sure they fit your drive train. Pm me and I will give you my paypal address.

 

[sfd60]

ok ill check in the next couple days! do you have to order 5 at a time? or can you order more?

I have a couple cruisers in my area and might just get a couple for xmas for these guys

 

[mgk67]

I will take one if group buy hasn't closed. I will double check measurement and pm you.

 

[PrimeFJ]

$55! Put me down shipmag, let me know where to send payment as soon as you have em available.

From Austin Tx