Toyocom OBD1 Bluetooth available again (1 Viewer)

[efjayatee]

Just to be clear. There were 2 versions of this. Toyocom (no longer available) and TOYOBD1 (current).

The Toyocom allows you to read codes.
The Toyobd1 does not.

Toyocom comes with the connector pre attached.
TOYOBD1 only the pigtail without the mating connector.

I ran the Toyocom (connector pre-attached) inside the engine bay and the heat caused the Toyocom to malfunction.

With the current TOYOBD1, you can extend the wires into your glove compartment and will not harm the module.

 

[Malleus]

Yep

I emailed them about it previously and it got resolved. Something to do with firmware updates.

Might have to do the same again

Inquiring minds want to know...

 

[CRK5540]

Just to be clear. There were 2 versions of this. Toyocom (no longer available) and TOYOBD1 (current).

The Toyocom allows you to read codes.
The Toyobd1 does not.

Toyocom comes with the connector pre attached.
TOYOBD1 only the pigtail without the mating connector.

I ran the Toyocom (connector pre-attached) inside the engine bay and the heat caused the Toyocom to malfunction.

With the current TOYOBD1, you can extend the wires into your glove compartment and will not harm the module.

View attachment 3843336View attachment 3843337

Currently the OBD1READ is available and the TOYOCOM isn't.
Are you sure that the only thing missing in OBD1READ is the ability to read CEL codes?

Or is there additional functionality that we will have to give up?

 

[ppc]

Currently the OBD1READ is available and the TOYOCOM isn't.
Are you sure that the only thing missing in OBD1READ is the ability to read CEL codes?

Or is there additional functionality that we will have to give up?

The TOYOCOM units came with a plug that matches the diagnostic connector where OBD1READ has no connector. Each has their advantages. If you want a permanent installation that later allows for easier in-cab mounting to keep it away from the heat of the engine compartment. Just needed to order a connector and cable from Amazon.

 

[efjayatee]

Currently the OBD1READ is available and the TOYOCOM isn't.
Are you sure that the only thing missing in OBD1READ is the ability to read CEL codes?

Or is there additional functionality that we will have to give up?

The current model has the latest FW with upgraded data logging. Every thing else is the same minus the ability to read CEL codes.