Tools for any UC member to borrow.

[Trollhole]

Marshall,

How low will the tranny jack go? I need to replace the clutch in my new (non-cruiser) project. I have some tall jack stands, but didnt know how low the tranny jack will go.

Ckuck has it. And since he is done with it ha can bring it to the next event or meeting and you can grab it then.

 

[89s rule]

Any idea how low it will go? Can I get it under say 18"? I will see if I can get in with Chuck.

Thanks!

 

[VTCruiser]

an oxy-acetylene/MAPP torch is another good one....anyone got one of these I can borrow??

 

[Trollhole]

Any idea how low it will go? Can I get it under say 18"? I will see if I can get in with Chuck.

Thanks!

Yes. low. It's not a very nice one but it has works on 3 trannys so far.

 

[72cruiser]

an oxy-acetylene/MAPP torch is another good one....anyone got one of these I can borrow??

hey gehn,

i've got a mapp gas setup. i can mail you the trigger attachment and then you could go pick up a mapp tank at lowes for 8 or 9 bucks. then just mail me the torch back whenever you get done with it...


let me know,
malphrus

 

[VTCruiser]

will it cut or just heat? I need something to can cut with.

 

[72cruiser]

will it cut or just heat? I need something to can cut with.

oh, this is for those bumper bolts?
yeah, this is a non-adjustable type deal, so it's just good for heat, no cutting...sorry.

can you get a mapp gas setup that will cut? i'm not even sure about that...


malphrus

 

[ClemsonCruiser]

well just adding to the list I have a engine stand to lone to anyone who wants it.........

 

[VTCruiser]

oh, this is for those bumper bolts?
yeah, this is a non-adjustable type deal, so it's just good for heat, no cutting...sorry.

can you get a mapp gas setup that will cut? i'm not even sure about that...


malphrus

i've heard you can, but i don't know for sure....

 

[VTCruiser]

is the air compressor available for lending? I also would like to to borrow a DA sander if anyone has one... Thanks!

 

[CandyPants]

Gehn, I have the air compressor and it's available. Only problem is that it's here in ATL. We'd have to figure a way to get it to you. Also, just an FYI...it's not very powerful so constant use airtools and what not are tough.

 

[Trollhole]

Heathe I'm coming to ATL Sunday to pick up some pig parts. Are you going to be around? I could swing by.

 

[Trollhole]

I updated my first post.

I'm also debating on going and getting Dave 1500 and getting it up to par.