mdcoa
SILVER Star
Comeup Seal Gen 2, 12.5k.
TJM vs Trail-Tailor Hidden winch tray comparison
- Thread starter fblainen11
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
What’s the actual dimensions on that? Every website I look at has something different ?
mdcoa
SILVER Star
I’d have to look at a website to find out….
I can tell you it fits. I thought I’d have to relocate the solenoid, but was able to squeeze it in….
mdcoa
SILVER Star
A guy in this thread did:
Hidden Winch Mount Behind Factory Bumper - 100 Series
Well I've been posting on Instagram a ton and wanted to finally post something on here for everyone to look at! Below is my build for my hidden winch Mount inside my factory bumper! To start the build I used a universal winch plate from Harbor Fraud! From there I cut it up and welded with my...
forum.ih8mud.com
I have the TT hidden winch installed on my LX with HF 12k winch. it is tight but it fits.
Last edited:
awesomeissquid
SILVER Star
For anyone who has the TT winch mount, how does it hold up to side loading when pulling from not directly in front?
mdcoa
SILVER Star
I haven't yet side-loaded it (Actually, I haven't had to use the winch at all in the couple years since I put it on), but it is so beefy that I cannot imagine it not holding up to any load that's geometrically possible. In case you were looking for hunches/speculation and not data.
awesomeissquid
SILVER Star
I love hunches! Thanks for the input. Maybe someone else will chime in or @TRAIL TAILOR themselves, but if not I'll have to do some testing if I go for it.I haven't yet side-loaded it (Actually, I haven't had to use the winch at all in the couple years since I put it on), but it is so beefy that I cannot imagine it not holding up to any load that's geometrically possible. In case you were looking for hunches/speculation and not data.
