I love SGI....great fishing
Pic from my dirt road runs in SW GA this weekend.....didnt get any good drifting shots
Can I drive your 100? I have been MISSING mine all week
and for the next few days.
Media The MUD 100 series Photos thread (27 Viewers)
- Thread starter IH8MUD
- Start date
Photo/Video/Audio threads
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Can I drive your 100? I have been MISSING mine all week
and for the next few days.
Bored today. Counting the days till she's on the road. "T" is much darker than it looks. It's a dark gunmetal. Switching things around on my 100 now that I have some time to mess with it and not worry about needing it in one piece in the morning to drive.
New Torsion bars
Thanks for the on-phone help Loud!
P.S- when they say you need 60MM of droop, they mean it!!!!
What?!?! I cranked on that pass side for an hour getting that stripped bolt out, gave you replacement TBs, tools and Loud gets the kudos? You are dead to me Nick.
Looks really good. Post up a full side profile shot.
pfran42 said:
I can't thank you enough for that help last week. Without your help I'd have a gangsta lean. So thank you Paul for being the key on getting it apart, I was sore for a few days. It is currently sitting 100%level with the 866 coils in the back. I am not sure if I want to add 30MM spacers back there or lower the front .5". Or keep it leveled out ( I don't tow, or do any heavy carrying)
Here ya go. Went back in like butta. Couldn't be happier right now
I need to buy you a beer, or three. I bet we could row to Africa in a day after doing that for a day non-stop
Thanks again Paul.
Looks great Nick!
We're cool...Looking at how you have it set up, I would lower the front a half inch like you were thinking about. It will handle a little better and I think the stance will be spot on. Also, once I get my tools back you are pretty much going to be stuck where you set it. Don't forget the alignment.
I'll be back in the morning in case you want to take a trip to the mountains.
I'll be back in the morning in case you want to take a trip to the mountains.
Looks great Nick, are those 35's. How much lift from the hub to the fender
Dobie said:
Rear is 22" and front is 21.75" hub to fender. I drove around the neighborhood with a tape measure and the torque wrench making the on fly adjustments. Every stop sign I would hop out and do a have turn.
Very happy so far.
Crummy picture, but that was before. Looked like my front end was collapsing!
EDIT: Tires are 305/70/16 KM-2's.
Last edited:
he said he tried to call you but you didnt answer...so of course he called me knowing I'd be there for him
Pictures from this past weekend.
hey loud where are you at in those pics? beautiful country
Private land in Montana.
FullyLitLED
Supporting Vendor
Available in the U.S. now? He is a mud vendor too...not sure I feel safe with a 4" IFS lift lol
the SFA is interesting though!
UZJ100 to UZJ105 Straight Axle Conversion [Susp- 100Lift8] : Extreme Landcruiser, Upgrades for Extreme Offroad Performance
UZJ100 LX470 Extreme 4 Suspension Lift [Susp- 100Lift4] : Extreme Landcruiser, Upgrades for Extreme Offroad Performance
Here's the picture
the SFA is interesting though!
UZJ100 to UZJ105 Straight Axle Conversion [Susp- 100Lift8] : Extreme Landcruiser, Upgrades for Extreme Offroad Performance
UZJ100 LX470 Extreme 4 Suspension Lift [Susp- 100Lift4] : Extreme Landcruiser, Upgrades for Extreme Offroad Performance
Here's the picture
The AT's are gone. Went with 305-70-17 Maxxis Bighorn's. We'll see how they do this weekend.
I flexed the suspension last weekend and the front tire rubbed slightly on the Carls UCA's. Not bad at all but I reinstalled the front spacers to play it safe.
UZJ100 LX470 Extreme 14 Suspension Lift [Susp- 100Lift14] : Extreme Landcruiser, Upgrades for Extreme Offroad Performance
This is for the 14" IFS suspension lift
Anyone know about these guys? I could be talked into getting a newer truck and going SAS if the price isn't insane... it probably is though.
This is for the 14" IFS suspension lift
Anyone know about these guys? I could be talked into getting a newer truck and going SAS if the price isn't insane... it probably is though.
Trunk Monkey
Moderator
Stick to pics please. New pics. Pics of 100's.
i'm really liking the blacked out look.New Torsion bars
Thanks for the on-phone help Loud!
P.S- when they say you need 60MM of droop, they mean it!!!!
i've found a local powder coater for my wheels. I havent seen anyone "blackout" the steelies so once the $$$ start coming in, it's on my list of spring and summer changes/mods.
cheers
peter
