Can you fit it in the gas fill area behind the door?Not worried about the cut itself, just the foreverness of it
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Can you fit it in the gas fill area behind the door?Not worried about the cut itself, just the foreverness of it
Something like this I assume...I used to be a firefighter, and we had power disconnects that would pop off if you drove off without unplugging them. I suspect there are home scale versions of the same thing.
Winner winner chicken dinner! Looks like thereās enough room there...I forget if you have the integrated trailer plug in yours, but it may not be a bad idea to consider either using that spot or going in right next to it.
Got around to mounting the Switch pad and tidying up some of the wiring. Staples make for good molex release tools!
View attachment 2604439
View attachment 2604440
View attachment 2604441
View attachment 2604442
That flat useless spot on the console is just screaming for a Swithpros isn't it?
I cannot believe you are still running the stock cupholder...Got around to mounting the Switch pad and tidying up some of the wiring. Staples make for good molex release tools!
View attachment 2604439
View attachment 2604440
View attachment 2604441
View attachment 2604442
Haha, itās never really bothered me but I have seen several options. Whatās your favorite one?I cannot believe you are still running the stock cupholder...
How much were all the parts for the shower tube?It's been 90+ degrees, and combining that with WFH, I've averaged about an hour a day outside working on the bumpers (zero on the weekends (family time)). Front is 100% and I decided to wrap up the water tank while I waited on the amazons to deliver me a 2 to 3 wire converter for the rear combo lights.
We live about an hour from the beach, so the plan for this thing was always just to wash the kids off before they got back into the rig. Honestly, I hadn't thought about all the sloshing, but now I'll make sure it's empty before we head back home.
Using a male to male adapter, I can use the hose bib to fill it up. City pressure gets it up to 49psi, or I can purge the air out to fill it to the brim. The water should be nice and warm from sitting in the sun all day, and hopefully the 100lbs rocket doesn't go flying off the roof
View attachment 2359694
View attachment 2359695
View attachment 2359697
View attachment 2359698
View attachment 2359701
So are you going under the knife or staying the course?I keep waiting on the dreaded re-gear,
@radman BH3D for the win.
BH3DPrinting - Etsy
Shop Finally Cup Holders for your Toyota!! by BH3DPrinting located in Whitley City, Kentucky. Smooth shipping! Has a history of shipping on time with tracking. Speedy replies! Has a history of replying to messages quickly. Rave reviews! Average review rating is 4.8 or higherwww.etsy.com
I agree, recent BH3D convert here and the juice is worth the squeeze.
X3 for BH3D
Iāve had them on both of my 200 and they are worth every penny.Anybody have their inserts? If so, are the worth $50?