TEQ badge for 100 series

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

guys, thank you so much for your help on this project and all of the orders you placed this week. You have kept me very busy.
 
Again, thanks for all the orders over the weekend. You guys are the definition of consistent. All but one of you ordered a black and silver one. Those look good, but I'm really surprised nobody chose any other color combos. The 80 series guys are all over the place with the color combos they order. I truly feel that the white background with black text looks the best on the white land cruisers. Silver background with black text looks nice as well. I have had a few LX450 guys order the white background with silver text to match there two tone white/silver LX450. I do have the black/silver, white/black, and red silver in stock and ready to ship next day; BUT I can also do custom color combos for the same price but with a couple day longer wait before shipping. I will snap a pic of the white/black combo when I get off work tonight.
 
I might be interested for my 2003 LX...has anybody figured out fitment yet?
 
I might be interested for my 2003 LX...has anybody figured out fitment yet?

I'm just waiting on delivery of that particular factory sombrero. As soon as I have it, I will get to work on making a badge that fits perfectly on the 03-07 100 series.
 
got it earlier. looks good, thanks.

guess white and black would have been good also but did't think of it.

IMG_20141027_170916_zps1cfec5de.jpg
 
I ordered the rear badge for my 100. The curved one. It'll work fine with a few hits to the top and bottom to effectively reduce the radius of the curve.
 
I ordered the rear badge for my 100. The curved one. It'll work fine with a few hits to the top and bottom to effectively reduce the radius of the curve.

I am not sure the TEQ badge for the rear hatch of the 80 series will fit your 100. If the curvature doesn't match, you can heat it in the oven to about 175 degrees for a few minutes and that should make it soft enough to bend it slightly. If that doesn't work then add 5 degrees to the oven and try again until you get it soft enough to be maluable. As soon as I get the 100 series badges in th mail, I will be making one that is an exact curvature and dimensional match to the 100 series.
 
Job Done!
Now I need the matching rear ;)

I liked how the gray matches the bumpers and the rims. Its a 1/4 :beer:job! 5 screws and you are done!
IMG_3694.JPG


IMG_3695.JPG
IMG_3697.JPG

Lets get the rear badge developed :bounce:
 
Those are looking good. I'm glad you like how it looks. I'm still surprised that I have only sold the black/silver combo to you guys. I'm sure someone will break the norm and go with a different color combo. I guess the black/silver is a nice classic look.
 
Those are looking good. I'm glad you like how it looks. I'm still surprised that I have only sold the black/silver combo to you guys. I'm sure someone will break the norm and go with a different color combo. I guess the black/silver is a nice classic look.
I bought a red/silver one too, but will wait until I put on a bull bar before I get that flashy. ;)

I forgot about the one red/silver one. I keep being optimistic that someone with a white 100 series will buy a white one with the black text. I have done that combo on the 80 series and it looked really good. I would like to see how it looks on the white 100 series. The silver background with black text looks really nice on the silver and gray paint scheme as well.
 
You probably should go ahead and start on the 200 series also.
 
Any suggestions for River Rock Green paint? I was leaning towards gray background with black letters… I am anxiously awaiting the development of the back emblem for the 100's as well! Looking forward to seeing them on my LC!
 
What about a white with red text?
I have done a couple of those for the fj40 guys but I have not done the red and white combo for the 80 and 100 series guys. That is definitely something I can do.
 
Any suggestions for River Rock Green paint? I was leaning towards gray background with black letters… I am anxiously awaiting the development of the back emblem for the 100's as well! Looking forward to seeing them on my LC!
the black and silver combo would probably look best with the green paint.
 
I got the rear oem tailgate badge and 2003-2007 grille badge in the mail. I will start working on the new teq badge replacement today.
 
I got the rear oem tailgate badge and 2003-2007 grille badge in the mail. I will start working on the new teq badge replacement today.
Great!
I'm ready for the rear badge, no more sombrero for me.
 
The down side is that the front badge IS different on the 98-02 and the 03-07; and they are different enough that I can't use any aspect of the old emblem. Both the front and rear will need to be made from scratch. It will take me a couple days to get a prototype created and then probably a few more versions before I have it perfected. I'm looking at late next week before I could have this ready on my website. I will work as fast as I can with the little free time that I have.
 

Users who are viewing this thread

Back
Top Bottom