so i took my inst. cluster out to see why nothing worked. everything looked very nice and clean except one of the studs for the amp meter was rusty. so i guess i will just clean those and the wire conections and go on.
any way, after finnaly getting the needle of the speedo ( i kinda tweeked it out of shape) i decided to stop there and see if i could just get it to turn and see if every thing worked wright. i found a allen wrench that fit in where the cable goes to see if it would turn and it was siezed up. worked it back and forth a little and got it freed up.
i was just going to spray a little brake kleen lubricant in there but thought i would get some imput from you guys on the best way to lube it.
do need to take it all the way apart to do this wright? (the inside of the speedo is very cleen and still has grease on all the gears)
or will the brake kleen or some other lube work just spraying it in there?
any way, after finnaly getting the needle of the speedo ( i kinda tweeked it out of shape) i decided to stop there and see if i could just get it to turn and see if every thing worked wright. i found a allen wrench that fit in where the cable goes to see if it would turn and it was siezed up. worked it back and forth a little and got it freed up.
i was just going to spray a little brake kleen lubricant in there but thought i would get some imput from you guys on the best way to lube it.
do need to take it all the way apart to do this wright? (the inside of the speedo is very cleen and still has grease on all the gears)
or will the brake kleen or some other lube work just spraying it in there?