Starter wiring for LS swap (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 4, 2004
Threads
27
Messages
111
Long story short my wifes 60 sat in our garage waiting for its heart transplant with the engine/trans/transfer out of it. Our puppy labrador decided the starter wires looked tasty to chew on. Pics are what is left. LS in in now and I need to wire the starter, and need to know what each wire is for?

IMG_5219.jpg


IMG_5218.jpg
 
all 60 series use the same colors for those wires.

Black/white - Starter
Red/black and blue - Reverse light
Yellow/black and white/black - 4wd dash light

I make this if you want easy NSS and reverse light functionality with your 4l80e. It plugs into the reverse light plug on your original transmission subharness that I'm guessing you didn't have plugged in (otherwise the 4-pin plug wouldn't have been hanging down to get chewed on). I also should have the repair connector to fix your damaged harness

 

Users who are viewing this thread

Back
Top Bottom