sputnik40's 14 bolt build
- Thread starter TURNMEOVER
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Yeah - the BF Pirate page has been good reading of late
.Thanks for calling Dennis. Front axle parts shipped last night.
- Thread starter
- #23
here is a little to look at.
any updates?
- Thread starter
- #26
it is done and gone to its new home. here are some pics and there is also some in the ballistic thread.
Where do I get in line? All I would want done is the hubs machined down and set up for the six lug? I am considering a 14 bolt rear for my pig....
- Thread starter
- #28
the machining takes about 4 hr ea. they will come ready for your studs and 3/4 bolts to retain the rotor. your hubs machined are 150 ea. my hubs machined are 200 ea. to include all the bolts and wheel studs installed is another 50. shipping is 25 pair.
must ship clean with no bearings or races.. call @ 352-572-9435
email souceyjr8@aol.com .
- Thread starter
- #29
oh sputnik. is it in yet?
i hope to start another soon. possibly for norma. we will see how long the pollys last.
i hope to start another soon. possibly for norma. we will see how long the pollys last.
So with the axle flange turned down too.... Do the bolts holding it to hub get in way of fitting rim on?
- Thread starter
- #32
7/16 low pro allen heads.
- Thread starter
- #33
i believe so call dave @ ballistic.
Been slammed with work and leaving out for Toronto to visit the girlfriends family - will get some pics up next week.
Got the allen head bolts - there were only 7 in stock, the rest are ordered - the original box had been sitting on the shelf for 3 years - I was lucky the place had some. Huge hardware supplier.
The Toy 14 bolt flange showed on the doorstep today - nice big hunk of $$$$ metal. Sorta wish the indexing ring had some sort of lock into the flange to keep some of the load off of the bolts, but shouldn't be any big deal.
Epoxy primed the whole thing in flat black. Nothing fancy.
Got the allen head bolts - there were only 7 in stock, the rest are ordered - the original box had been sitting on the shelf for 3 years - I was lucky the place had some. Huge hardware supplier.
The Toy 14 bolt flange showed on the doorstep today - nice big hunk of $$$$ metal. Sorta wish the indexing ring had some sort of lock into the flange to keep some of the load off of the bolts, but shouldn't be any big deal.
Epoxy primed the whole thing in flat black. Nothing fancy.
And still beating on it to this day. Ps the pollys are still alive.
