Second 40 (1 Viewer)

[warpdriv]

That plastic housing is used by EGR system. I removed it. Scroll down through this link to see it. http://mb.bolinko.org/15/warsztat-m...-operation-exhaust-gas-recirculation-usa.html

Man! What a gold mine site that is! Thank you for the link. Where did you get the oil lines made?

 

[warpdriv]

On this episode of what do I need to fab, I got the battery box modified and mounted.

 

[davegonz]

I made the lines with AN fittings. Not difficult to do yourself.

Man! What a gold mine site that is! Thank you for the link. Where did you get the oil lines made?

 

[warpdriv]

Got throttle hooked up by reusing some brackets and with the new throttle cable kit . Also hooked up the vacuum pump hooked up to the brake booster.

 

[warpdriv]

I'm at a point where I need to order some parts so I shifted gears and started working on the interior. I assembled my tubing notcher and started assembling the kit that I bought from Metal Tech. The kit is very nice with one end of pipes already notched where there are pipes that require two notched ends.

 

[warpdriv]

Got most of it tacked in and position the front posts so I can roll up/down the windows.

 

[kling-on]

Looking good... Want to rent out that notcher sometime

 

[G-Cat]

Laces out...bold move!

 

[warpdriv]

Looking good... Want to rent out that notcher sometime

Sure. If you want to put the cage in just bring your cruiser over we'll have a build fest.

 

[kling-on]

Sure. If you want to put the cage in just bring your cruiser over we'll have a build fest.

I have had a metal tech cage in my garage for 5 years

 

[warpdriv]

I have had a metal tech cage in my garage for 5 years

Geet-r-done!

 

[davegonz]

Looking good, but everytime I see your truck, I want a Creamsicle.

 

[warpdriv]

Well I can't wait till this weekend to see if this works out.

 

[warpdriv]

Got the first phase of the cage burned in and painted.

 

[warpdriv]

More cage work today. Got the front passenger side frame tie-in done and got the front spreaders cut and ready to burn in.

 

[warpdriv]

Another good day in the shop. Got the cage interior finished. Now I just need to finish the frame tie ins. I decided to go a little bit different with gusset tubes.

 

[warpdriv]

Put on the gaskets for the hard top sides from the SOR hard top gasket kit.

 

[davegonz]

Updates?

 

[kling-on]

Cage looks awesome

 

[warpdriv]

Sadly, I have no updates except to report I have a bunch of boxes with a bunch of new parts ready to go on. Work and bad weather is just eating up wrenching time. the first sunny day that appears, the game is afoot!