San Diego Swap Meet
- Thread starter tlcruiserman
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
If you fly out I would be happy to pick you up. I'm 5 min. from the airport.
John McVicker
SILVER Star
Subscribed.
John
John
Subscribed
Shawn
Shawn
- Thread starter
- #25
Sure we can get you from the Airport, are you talking San Diego Airport or are you flying yourself, if that is the case I am a few blocks from Ramona airport. eitherway we can get you if you are coming.
Cheers,
Michael
- Thread starter
- #26
Location
Hello All,
The Swap meet will be at my property in Ramona where West Coast Crusiers shop is located. We have a shop, house and some out buildings and plenty of open space (freshly cut by the swap meet) for everyone to setup on
Address:
866 James Street
Ramona, CA 92065
We seem to have a lot of interest so I am hoping to get over 50 foks with stuff to sell and hopefully even more attending.
You can PM me if you like or if you need or have any questions you can always call me on my mobile @ 858-243-9680
Cheers,
Michael
Hello All,
The Swap meet will be at my property in Ramona where West Coast Crusiers shop is located. We have a shop, house and some out buildings and plenty of open space (freshly cut by the swap meet) for everyone to setup on
Address:
866 James Street
Ramona, CA 92065
We seem to have a lot of interest so I am hoping to get over 50 foks with stuff to sell and hopefully even more attending.
You can PM me if you like or if you need or have any questions you can always call me on my mobile @ 858-243-9680
Cheers,
Michael
Hello All,
The Swap meet will be at my property in Ramona where West Coast Crusiers shop is located. We have a shop, house and some out buildings and plenty of open space (freshly cut by the swap meet) for everyone to setup on
Address:
866 James Street
Ramona, CA 92065
We seem to have a lot of interest so I am hoping to get over 50 foks with stuff to sell and hopefully even more attending.
You can PM me if you like or if you need or have any questions you can always call me on my mobile @ 858-243-9680
Cheers,
Michael
What time on the 5th?
Cool! I am going to drive down from the San Fernando Valley in my 1HZ powered 80.
See you there!
See you there!
1973Guppie
Supporting Vendor
I am in, crushed my rear marker lite today at calico, anyone got one? ;0
- Joined
- Feb 7, 2005
- Threads
- 41
- Messages
- 360
- Location
- Leucadia (San Diego)
- Website
- www.anzaborrego.net
Cool so that will be 2 HZJ80s
Yes, sir. Mine is a '91 with an R151 and p/t 4x4. It is in nice shape. It is actually in the shop now getting a new IP and timing belt. I will get it back this week. I expect it will be running fantastically for the drive on 2/5.
I look forward to seeing yours as well as all the other diesels.
- Thread starter
- #33
We are going to start setup at 7am. Offically we start at 9am and it will run until everyone has had enough or it starts to get dark so lets say 6pm at the latest.
WCC will be suppling water and soda and we will have
San Diego Street Eats providing gourmet food for those that wish to purchase. I hear there food is really good.
Cheers,
Michael
- Thread starter
- #34
Yes, sir. Mine is a '91 with an R151 and p/t 4x4. It is in nice shape. It is actually in the shop now getting a new IP and timing belt. I will get it back this week. I expect it will be running fantastically for the drive on 2/5.
I look forward to seeing yours as well as all the other diesels.
That is Great, depending on what year, I can suggest they use lock tight on the IP bolt, I had one come lose earlier this year on my HZJ75/PU and it was not pretty...can you say new valves
Looking forward to seeing your Cruiser
Cheers,
Michael
Count me interested, I had great looking fenders until a week or so ago when I smashed up the front driver's side. A replacement would be way easier than trying a repair with my poor skills.
Anyone got any fender flares for a 80? also loking for a front panhard, rear lower control arms, and front radius arms.
if you can wait until the swap meet - I'll have the front panhard bar fresh off my cruiser. You have first dibs...
If I dont find one in the mean time, Im on it.
- Joined
- Apr 14, 2004
- Threads
- 1,470
- Messages
- 36,736
- Location
- 818-953-9230
- Website
- www.marksoffroad.net
Just heard about this today; I will plan to attend, even though I'm expected in Johnson Valley the next day.
Of course I have a lot of things I 'could' bring with me, and I invariably get asked for stuff once I'm there that I 'could' have brought with me, I am much more likely to ACTUALLY bring stuff if you tell me AHEAD OF TIME.
And telling me BY TELEPHONE is a lot more likely to get something packed than an internet post. My parts are no where near my computer.
Of course I have a lot of things I 'could' bring with me, and I invariably get asked for stuff once I'm there that I 'could' have brought with me, I am much more likely to ACTUALLY bring stuff if you tell me AHEAD OF TIME.
And telling me BY TELEPHONE is a lot more likely to get something packed than an internet post. My parts are no where near my computer.
That is Great, depending on what year, I can suggest they use lock tight on the IP bolt, I had one come lose earlier this year on my HZJ75/PU and it was not pretty...can you say new valves
Looking forward to seeing your Cruiser
Cheers,
Michael
Looking forward to not only meeting you and checking out your fleet, but also to you looking at my rig. I'll be interested to hear what you think of it.
I may have something work related to do that morning, in which case I would not be down there til 1 or 2 o'clock. Hopefully that won't be necessary and I'll get started earlier. Either way, I will see you there.
