Samurai stretch, auto,doubler to dana 300, stickies (1 Viewer)

[zukinut]

Lenny I got some sexy pics to post up tommorow. Keep uo the good work that zuk is sweet.

 

[zukinut]

Here is a teaser pic I'll post up more tommorow. Now I gotta get off my azz and finish it up

 

[lenross1]

nice ! now get to work!

 

[Jordan7118]

Here is a teaser pic I'll post up more tommorow. Now I gotta get off my azz and finish it up

Nice! Picked up some arms from Hellfire Fabworks. Smokin'!

 

[lenross1]

1st stage of seam sealer. I will sand it then paint it i guess. Never used this stuff before so we will see if its worth a flip.

Its from 3M and its like $15 a tube so i hope i only need one tube.

 

[wngrog]

Wow, I did not know you still had this...

 

[Land Speeder]

1st stage of seam sealer. I will sand it then paint it i guess. Never used this stuff before so we will see if its worth a flip.

Its from 3M and its like $15 a tube so i hope i only need one tube.

let me know if it does work! I need it.

 

[lenross1]

Wow, I did not know you still had this...

Zzzzzzzzzzzzz

 

[lenross1]

let me know if it does work! I need it.

Will let you know

 

[SHUSH]

1st stage of seam sealer. I will sand it then paint it i guess. Never used this stuff before so we will see if its worth a flip.

Its from 3M and its like $15 a tube so i hope i only need one tube.

Edumucate me....is this in lieu of welding, is this because it's aluminum or what?

 

[lenross1]

I am using seam sealer to smooth out my spot welds.
You still need to weld panels.
Panels are galvanized.

 

[lenross1]

Just rebuilt front axle. Longfields, 6 shooter knuckles, ARP Studs, chromo hub gears, ARP hub studs. We will see if it holds together this time.

Bought the flanges as well. I let how much time i had decide which one i was going to install ( hub gears or flanges). Didnt have time to drill out hubs to fit bigger dowels etc.

 

[Land Speeder]

flanges

ROH TAHDE!

 

[Jordan7118]

Just rebuilt front axle. Longfields, 6 shooter knuckles, ARP Studs, chromo hub gears, ARP hub studs. We will see if it holds together this time.

Bought the flanges as well. I let how much time i had decide which one i was going to install ( hub gears or flanges). Didnt have time to drill out hubs to fit bigger dowels etc.

Awesome! Just about as stout as you can make a Tay-ota SFA!

 

[Land Speeder]

Awesome! Just about as stout as you can make a Tay-ota SFA!

a mini SFA...

 

[Bossman]

Will both rigs fit on your trailer?

 

[lenross1]

Will both rigs fit on your trailer?

Nope. Jrob was kind enough to haul the zuk down for me.

Camper and 40 fit though! We will set it back further on the ramps come go time. Sheilalala came real close to seeing the inside ofvthe camper when she pulled it up on trailer. Got about 2 inches between camper and the 40 in the pics. i can squeeze out about 8-10 more inches between the 2.

 

[wngrog]

Nice.

 

[Land Speeder]

Nope. Jrob was kind enough to haul the zuk down for me.

Camper and 40 fit though! We will set it back further on the ramps come go time. Sheilalala came real close to seeing the inside ofvthe camper when she pulled it up on trailer. Got about 2 inches between camper and the 40 in the pics. i can squeeze out about 8-10 more inches between the 2.

That stuff holding the camper down... is it ADA approved? waxed?

 

[Bossman]

You go girl!