Rust removing options (1 Viewer)

[Lcerva]

Hey,

Anyone use this to remove rust from their under carriage?

100W Rust Cleaning Laser - Removes Rust Effortlessly

 

[Kofoed]

Hey,

Anyone use this to remove rust from their under carriage?

100W Rust Cleaning Laser - Removes Rust Effortlessly

Interesting. I wonder how thick of a rust layer it can deal with......

 

[katit]

Sounds too good to be true

 

[brownfox]

That whole website is a scam. Don’t even try unless you want to cancel your credit card for fun.

 

[katit]

Actually I googled and device legit, but it’s tens of thousands of dollars, not $168 haha

 

[CLEcruiser]

The real thing is very impressive, but I believe they start around $50k

 

[Alibaster]

Let me just laser through all my hoses real quick

 

[CanadianRockyCruiser]

I've used a similar machine to remove a tattoo from my pal. It was fun to watch him scream like a pansy.

 

[suprarx7nut]

Hey,

Anyone use this to remove rust from their under carriage?

100W Rust Cleaning Laser - Removes Rust Effortlessly

Lasers and baby clothing. Two natural products to sell together.

Scam.

The real lasers like that are neat, but would be terrible for a car anyways, unless you had everything stripped down.

 

[rickyrockrat]

I used this - two Craigslist PC power supplies hooked in series to give me 24V@40A, the used pipe from my well for the anode, and 6mil black plastic with washing soda (you can convert used baking soda to washing soda by heating in the oven at 400 degrees for 30 minutes. The mixture, though nasty looking is harmless and can be poured on your lawn.
The paint is epoxy primer, and I used the internal frame paint from Eastwood inside. Applied it with brake line attached to a 5-way nozzle, then run down the frame.

Probably not what you were looking for.

 

[cruizin18]

I used this - two Craigslist PC power supplies hooked in series to give me 24V@40A, the used pipe from my well for the anode, and 6mil black plastic with washing soda (you can convert used baking soda to washing soda by heating in the oven at 400 degrees for 30 minutes. The mixture, though nasty looking is harmless and can be poured on your lawn.
The paint is epoxy primer, and I used the internal frame paint from Eastwood inside. Applied it with brake line attached to a 5-way nozzle, then run down the frame.

Probably not what you were looking for.

View attachment 2271118

View attachment 2271119

View attachment 2271120

Like the ingenuity