Rubithon '08 Spare Parts Database

[619TOY]

There have been a few requests for a database of spare parts people will be bringing to Rubithon. If everyone bringing spare parts could post up what they're bringing and which run they'll be on, it may help in the event of a breakage. I think this thread should be limited to the following info only and chat should be completely avoided. I will be happy to convert this thread into a spreadsheet if I can find the time. I will be spending almost all of my free time preparing for the festivities

• Run you will be on
• Part name(s)-(be as accurate as possible)
• Model and year(s) the part fits
• Your mechanical ability (in)-optional
• Special skills/abilities-also optional

 

[619TOY]

• Wagon Run
• rear driveshaft
• 1997 80 series
• 
• 20 years in automotive electrical, I can help with just about anything that can be diagnosed with a DMM

 

[TOY350]

Big Jim's All Day Thursday Run
80 Series Birf (95 FZJ80)
40/60 Series Birf (86 FJ60)
(2) Sets Inner & Outer Wheel Bearings Front/Rear (95 FZJ80)
+ mechanical ability

 

[peesalot]

Committe on Big Jim's run.

Land cruiser third (4.10)
Saginaw ps box ( the J20 big piston one) 4 bolt - 13/16 shaft
Clutch master 1970 , late production with boosted drum brakes
Clutch slave
brake line , hard and soft, 1970
sbc HEI Cap, rotor, coil, ign. module
Front dana 60 stub shafts, wheel bearings, u-joints, lock out slug
3 qts 90w
3 qts 30w
Nose cone for t-case- coarse spline
sbc ps pump, bolt on pulley
ARB line (alot) + misc small parts for repairs, solenoids, fittings.
Starting fluid
Brake Kleen
Spare rear d-line. 1970 pattern for soa set up
1shackle with bolts
exhaust tube for radiator hose repair
more to come, gotta look in action packer.

 

[chappysfj40]

Run you will be on: Wagon run


Part name(s)-(be as accurate as possible)
-stock shackel fj60
-bushings fj60
-belts for chevy v-8
-dis. cap 88 350 TBI, wires
-fram fuel filter G3727
acdelco relay 1408-9936
-fuel pump gm#25168719 electric
-85 L/C axel seal
-kingpin bearings TRO305A

most parts are form my rig 85 fj60 with a 88TBI 350 chevy

Model and year(s) the part fits

Your mechanical ability (in)-optional
Good overall mechanical ability, Hell iam a NAVY Seabee......
I will have a crap load of tools and all kinds of quick fix stuff that will make Macgyver proud..

See you all there
cheers Chappy
Special skills/abilities-also optional

 

[TRT2]

Tie rap (one)
duct tape (partial roll)
black tape (kinda old, both sides don't stick)
bailing wire (rusty)
bag of balloons (don't ask)

crescent wrench
pliers
pipe wrench
hammer

and the main item which never lets me down... 350 TLCA members, their trucks, their knowledge and their great attitudes. What else does a guy need? Oh ya, Cindy!

It's all good!

 

[landcrusher909]

Parts

Wagon Run​

73 Fj-40 F-Motor stuff ,fuel pump, water pump, coil, starter, birffs, hoses, fan belts,Dizzy, misc nuts & bolts, Crap load of tools, portable compressor, tire plugs, Spare warn hub, another small box of misc. parts. stuff I take on any trip Willing to get dirty and have a good time 20 years of working on my 40

 

[woooody]

100 lbs of Tri tip
60 lbs of Chicken
100 lbs of sausage
400 tortillas
bags and bags of eggs
80 lbs of Chili
200 ears of corn
...

Oh, you meant spare parts

Wed Double Locker
40 birfield
bearing grease, 90 wt
electrical wiring and connectors and Fluke DVM
enough tools to strip and repair most anything.

No diffs, no axles, no knuckles.

 

[2ndGenToyotaFan]

You could probably trade all that food for someones running vehicle if things get rough Ross....

 

[CRUZR66]

Thursday Morning 7AM

I have a Ready Welder,
Mini Grinder,
Drill Motor
Die Grinder,
Air Tools,
Spare Dana Axles, Mini Truck Front Axles W Birfields,
Gear Oil 90wt
Steering knuckles for Mini Truck,
Bearings for inner and outer and Knuckle bearings
Engine Oil
AntiFreeze Coolant
Grease
If there's any thing else I'll Throw it in My Trailer, I can just about fix anything broken
on the Trail ,if not Fixable, i can Drag you down to the Springs and we can get you fixed there.

Big Jim aka Gunner

 

[pardion]

I'll have a whole bunch of the usual repair stuff in camp thursday morning, ask for Firefly or John Pardi with TOTR, If we have it, we can hike up the trail to get it to you. If your stuck at Spider and Merlin is around, we can get in touch via ham radio. I wish we had this data base 20 years ago, for the first ten years I pulled a trailer load of parts. BUT "we won't need no stinkin parts" John aka PARDION

 

[hatfieldcb]

I'll have a complete set of FJ40 front, inner & outer, and FJ40 rear axles, and an FJ40 rear drive shaft. And probably a couple of extra Birfields.

 

[TRT2]

Big Jim... did you see my PM? Send me your email address please...


Lets keep this on track, other very important stuff...

Don Julio
Shamucos
Blue agave nectar
Jose' (for mixing)
mix
Limes


All for in camp of course...

 

[Dion M]

All right, where are you camping now

 

[Pighead]

The Knorr Bros. are bringing in a trailer with the heavy spares... I'm adding a third and a couple of mini-knuckles (passenger side). I know they're adding another third. Probably more. This trailer will be parked on the slabs by the river. where they usually park it...
On the wagonrun, I'll be carrying: a couple of driveshafts, pair of birfs, long side rear axle, 2Fwaterpump, 2Ffuelpump, handful of '74ish carbparts, some nuts&bolts, some fluids.....the usual stuff.

 

[pismojim]

Primary:
4 -5 liters of Cazadores 100% blue agave Tequila
10-15 shot glasses
Couple dozen green chile bean burritos (PETT w/ extra WAG bags).
Ipod full of reggae (and Lynard Skynard).
Chain saw, splitting maul, windproof lighter, campfire permit.
Blue tarp, DEET and comfy camp chair.

Willing and happy to wait a week or two on the trail for the rescue party to arrive.

If bored while waiting for help:
Duck tape, bailing wire, zip ties, multi-tool, and large hammer.

And since you asked... some extra weight to make wheeling more challenging (FJ60 spares):
Driveshaft, FF/RR FJ60 axles, birfs, knuckle kit, bearings, knuckle(RT), rod ends (80 Series), JACK STANDS <=very popular.

Enough fluids and grease to change everything - including the necessary accessories to get it out, get it in, clean-up and haul it out.

Box of Electrickery stuff plus hoses, clamps, spark plugs, bolts/nuts, tire plugs, valve stems and monkey snot.

Tools:
A 17mm socket and extension to check knuckle studs/nuts daily.

Wrenching ability:
Basically helpless (but not as bad as TRT2), willing to watch if you show me.

Last but not least:
2m radio - call sign KI6TLC monitoring 146.460 simplex and the "805" repeater.

Run:
Mudrak's Double Locker Run a.k.a. "Lock and Roll" Run
Somewhere on the trail, both directions, day or night, between Sunday and Sunday.

 

[PKP80]

Jim, Postin pics, I couldn't resist posting a few myself. Cheers

 

[pismojim]

Hate to Hi-jack such a well written and organized thread, but pics are always cool. Sometimes I can't read so well...

So where is the pic of your "new" truck Sammy?

 

[CRUZR66]

Pismo Jim

My E-mail is sqengr@yahoo.com or on here as cruzr66 I'll be Bringing some Tequila also, probally not as much as you but I'm sure we'll both have a great time,
JIM

 

[PKP80]

Hate to Hi-jack such a well written and organized thread, but pics are always cool. Sometimes I can't read so well...

So where is the pic of your "new" truck Sammy?

Those who make Rubithon will get to see her. The rest will have to wait I just have to get her done by next week.