RIGd Ultraswing Mega on a 100 series

[ElHefe]

clearance is good. license plate at like 80 degrees open is about .5” and same to 90 degrees.

Quick question: do your wheels have zero offset?

 

[blackohio]

Quick question: do your wheels have zero offset?

they are. 16x8 et0 they do rub the cab pinch weld, I havent gotten around to cutting and flattening it out, cutting its only a minor annoyance.

 

[hotdiggitydamn]

I can’t believe I’m the first: Nice bike dude!

edit: flat pedals?!?!?! Lol. Jk. Kids. I get it. You should see the looks I get when I clear the step up on my cross bike with the kid in the trailer.

 

[SmoothLC]

How long of an extension do I need for my Thule XT Pro T2? 4 inches should clear a 12.5” wide tire.

View attachment 2438627

Looks like a good fit @ElHefe.
I see what you mean now vs. the Wilco.
BTW how do you like that rack and how does it work off-road?
I'm stuck between choosing that vs. a 1Up.

 

[geared2xplore]

So, the mega is an option as it's arm is actually a tad lower, but the upper is taller. The regular ultraswing with the high offset mount might be a great alternative and technically the arm is a slight bit higher.

Heres mine. 16x8 et0 285/75r16
View attachment 2442525View attachment 2442526View attachment 2442527

Hi,

Nice rig! Is this the ultraswing multifit? Im picking up one today and wanted to know if a 35's fit on the spare mount with same wheels. No rubbing? No extra part i need to buy? The ultraswing multifit that im picking up came from a tacoma. Thank you in advance.

 

[blackohio]

Hi,

Nice rig! Is this the ultraswing multifit? Im picking up one today and wanted to know if a 35's fit on the spare mount with same wheels. No rubbing? No extra part i need to buy? The ultraswing multifit that im picking up came from a tacoma. Thank you in advance.

i’m not sure i’d message those guys on ig.

 

[shtbrwn86]

Yes, I would go with the Mega if this is the route you take. Remember, the spare tire bracket is too short and you will need spacers if you run stock 100/200 wheels. Good luck!

Old thread I know, but what about stock Tundra 18" wheels? any idea if those also need a spacer?

 

[ElHefe]

Old thread I know, but what about stock Tundra 18" wheels? any idea if those also need a spacer?

You’d have to check the backspacing on stock 100 vs stock Tundra wheels. Not sure.

 

[SmoothLC]

Bringing back an old thread.

Does anyone know if a spacer is required to fit 18 inch Tundra TRD Pro wheels on the UltraSwing Mega-Fit?