Replacement seats with wrinkles or without wrinkles?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Ridies

Supporting Vendor
Joined
Dec 9, 2019
Threads
69
Messages
364
Location
Fishers
Website
ridies.com
What do you guys prefer wrinkled insert seats or seats without wrinkles? We have created both for Lexus LX470 for our clients.

You can always Call us at 317-516-5962 to discuss your queries. We would love to assist you!
We are grateful to our customers for sending in their installed pictures

Share your thoughts about these 👇

571_12715_2_Original_Large.jpeg
673_3_Large.jpg
 
@Ridies -preference is no wrinkles-

Suggestion: OEM seat bottom foams are hard to find- and expensive when you do. If you can come up with a replacement bottom seat foam that is close to or equivalent to OEM- I bet you can make some sales along with the covers. (Attachment rate would be high).
 
Wrinkles. LHD. Arm rests. Small console.

Agreed, foam would be a nice option

Aren’t the OE LC seats a slightly different pattern w/o wrinkles, while the OE LX seats are the above pattern w/ wrinkles?
 
Wrinkles. LHD. Arm rests. Small console.

Agreed, foam would be a nice option

Aren’t the OE LC seats a slightly different pattern w/o wrinkles, while the OE LX seats are the above pattern w/ wrinkles?
You are correct, sir.
 
I'd say perforated is definitely more important than wrinkled. Keeps your tushy breathing in summer!
20220701_155633.jpg
 
@Ridies -preference is no wrinkles-

Suggestion: OEM seat bottom foams are hard to find- and expensive when you do. If you can come up with a replacement bottom seat foam that is close to or equivalent to OEM- I bet you can make some sales along with the covers. (Attachment rate would be high).
Good suggestion.

I’ve seen videos of steaming the foam back to life, which looks pretty slick. I’ve always wondered how much life it has, though.
 
We will definitely forward your suggestion to the manufacturing side.
@Ridies -preference is no wrinkles-

Suggestion: OEM seat bottom foams are hard to find- and expensive when you do. If you can come up with a replacement bottom seat foam that is close to or equivalent to OEM- I bet you can make some sales along with the covers. (Attachment rate would be high).
 
We will definitely forward your suggestion to the manufacturing side.

I know this is the 100 forum, but same comment for the 200s. Replacement seat foam option.
 
You are correct, sir.
Yes. You are right. LC seats are straight in the middle section while LX has curved pattern.
Wrinkles. LHD. Arm rests. Small console.

Agreed, foam would be a nice option

Aren’t the OE LC seats a slightly different pattern w/o wrinkles, while the OE LX seats are the above pattern w/ wrinkles?
 

Users who are viewing this thread

Back
Top Bottom