Anyone know where I can get a seal kit for these? I can't was my truck W.O. getting water inside. Time to fix it. I can find them in the SOR catalogue for every other window...
rear slider window seals
- Thread starter apocalypsegrrrl
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
R those
Are those the non-usa factory sliders? Because I need new seals as well
Are those the non-usa factory sliders? Because I need new seals as well
- Thread starter
- #3
Yes. Aussie spec.
cool
Well, we'll wait for a response together
Well, we'll wait for a response together
- Thread starter
- #5
SOR can't get them. Roodogs can't get them. Solutions anyone?
if its the bailey channel rubber that the glass slides in its available down here as aftermarket,i could ask the toyota dealer for a price on originals but i reckon that would be crazy dear,im hopeless still dont know how to post links do a search for 'scotts old auto rubber' im pretty sure theyv'e got the doulble channel stuff ya lookin for,they should ship to usa,no luck let me know,may have another lead on some.
goldchaser
goldchaser
- Thread starter
- #7
goldchaser:
Yes, it's double channel rubber. My local autoglass place only has single channel. Thanks for the lead.
Yes, it's double channel rubber. My local autoglass place only has single channel. Thanks for the lead.
- Thread starter
- #8
TOYOTA LAND CRUISER 1980/87 FJ60 & BJ60
These guys seem to have something on their website. I'll let you know if it works out.
Thanks, Goldchaser!
These guys seem to have something on their website. I'll let you know if it works out.
Thanks, Goldchaser!
What
What do those prices work out to in USD's
What do those prices work out to in USD's
Anyone have a pic? Toyota still make a number of vehicles such as the Hiace and Coaster that have sliding windows.
They look a bit the same as the 60 sliders ,athough bigger.
I asked a large aussie glazier and they said they could match it up if they had a sample
- Thread starter
- #11
Goldchaser's a genius! The guy from Scott's emailed back. He says it's the right seal. It's $42.21 Aus which is about .90/US1$. I'm not sure what's included. I've got an email in to him to clarify. It might just be the double channel interior seal between the glass and the window frame. I need the whole shebang, but it's a start. Trapper, I'll let you know how it works out.
Roscoe, I'll let you know if this doesn't work out.
Roscoe, I'll let you know if this doesn't work out.
Thats...
That's the impression I get. That it is the "internal seal for the window's sliding track inside the frame, still, I need that too. Now if we can just find the outer.
Thanks for chasing this so hard
That's the impression I get. That it is the "internal seal for the window's sliding track inside the frame, still, I need that too. Now if we can just find the outer.
Thanks for chasing this so hard
euclid
SILVER Star
More info on some other options:
https://forum.ih8mud.com/60-series-wagons/67831-pulling-glass-sliding-windows.html
https://forum.ih8mud.com/60-series-wagons/46334-group-buy-aussie-sliding-windows-8.html
https://forum.ih8mud.com/60-series-wagons/110906-those-whove-installed-aussie-sliding-windows.html
https://forum.ih8mud.com/60-series-wagons/67831-pulling-glass-sliding-windows.html
https://forum.ih8mud.com/60-series-wagons/46334-group-buy-aussie-sliding-windows-8.html
https://forum.ih8mud.com/60-series-wagons/110906-those-whove-installed-aussie-sliding-windows.html
Thanks
Thanks Yuke
Thanks Yuke
Not real often i get called a genius apoco girl,i had a quick look at mine yesterday and i might replace them at some stage also,but it looks like the baily channel rubber is the only seal,i can see how they have slots in the rubber for the water to drain away,then slots in the frame under the rubber for drainage also,just make sure none of them are blocked with dirt etc,mine had dirt in them,so with new seals you may have to cut a few slots in them,i think drill holes would block up to easy,looks like it is available over their also.
goldchaser
You'll play hell replacing it with the windows in the truck. I got the Bailey channel referred to in a couple of the threads & it had to be trimmed to be made to work. We (mainly my auto glass guy with me checking on him) might have even glued it it. And you're right - you have to cut out for the drain slots.
When it rains, it pours. I have been waiting for some help with this install for some time. But two threads in the same day! You guys are the best. But I'm embarrassed to say, I could still use a step-by-step if anyone has the patience and inclination. Mant thanks.
- Thread starter
- #18
The seals showed up from Scott's Old Auto Rubber in Australia less than a week after I ordered them. They look like outstanding quality. I've got a guy who's going to install them for me and figure out the outer seal. I'll let you know.
Can you post any more pictures of your 60 apocalypsegrrl?
Grrrl -
Expound on the "outer seal". I finished mine & don't know what you're referring to.
Expound on the "outer seal". I finished mine & don't know what you're referring to.
