Rear inner door handle- 2 types available

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Diff Kraken

SILVER Star
Joined
Oct 4, 2018
Threads
28
Messages
1,908
Location
USA
My rear door handle finally broke. Im seeing 2 different OEM designs on ebay. Thinking this different looking one looks stronger than the design my 2009 had from the factory. Does anyone have experience with this?

Original clip style:
A19D404F-CE6A-4230-BB85-57959989B661.jpeg


And the other different one (looks stronger?):
775877AA-CB98-41A5-84A0-EC2A0A6211E8.jpeg
 
I'm pretty sure you need both. The clips in the first photo install into the handle itself after it has been installed onto the door panel.
 
I'm pretty sure you need both. The clips in the first photo install into the handle itself after it has been installed onto the door panel.
Ah ha... this is making more sense now. Lol. Thanks
 
The clip is weak.
I fixes mine by using spiral drywall anchor and a small piece of plywood behind the square clip opening. Then use screw and washer to hold the grab handle. You could only see the screw when you raise the handle.
 
Ok. So I found what broke. It looks like I need to buy the handle but not the little clip...
D3B1A485-6A64-40DB-B6A1-BB3973A79594.jpeg
 
Mine broke as well when I removed the door panel last year. I replaced the handle, but if it breaks again I will loop a Nite Ize gear tie through the two holes and call it good.
 

Users who are viewing this thread

Back
Top Bottom