Rear brake caliper replacement, what else do I need? (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Is the LSVP leaking, squeeze the rubber protection boot and see if it pees on your hand. They are like a toad in that respect.
This is the LSPV after I squeezed it, you can see fluid leaking from it. It did “squirt” out on me a little bit. (😂) Should I replace this too? If so, what exactly should I replace? Whole LSPV? Rubber boot?

A466CAAB-7491-4E96-AF8C-58E21CF811E2.jpeg
 
I would swap out the complete LSPV or delete it (if this is an option)
 
The complete LSVP. Might need the bolt assembly too, depending on corrosion. It's two studs welded to a backing plate, I had to cut the flange (backing plate) off mine with a sawzall.
 
Yep, whole thing. The internals are not serviceable. So replace (or some choose to delete)
 

Users who are viewing this thread

Back
Top Bottom