Parting Out Raymond, MS 1996 Land Cruiser (1 Viewer)

[offr0adlim0]

Vehicle Model

1. 80 Series
2. LX450

Parting out a Maroon 96 with tan interior. Let me know what parts you are interested in. Prefer local pickup on larger items. Truck had a large oak tree fall on it while it was in a garage.

Driver side doors are still functional. Hood has a dent. Front fenders have scratches.
Truck has 249k miles. Sill runs and drives and would like to keep it that way until the drivetrain sells. I’m using the locked axles under my other 80 but will have the un-locked axles (334k miles) from that truck for sale once the swap is complete. Has OME Stock height springs with Bilstein 4600 shocks that are up for grabs.

Parts that are not for sale:
Both Locked axles
Locker wiring
Locker Modue
Headlights
Corner Lights
Front Indicators
Exhaust System
Driver front door handle
Steering Wheel
Steering Stabilizer
Wheels
Driveshafts
Dash & Console

Post in this thread what parts you’re interested in so that I can keep track on places in line. I will pull parts and add pictures. WI’ll accept reasonable fair market value. Keep in mind the time investment on pulling and packaging parts. I also have a full time job so parts pulling, pictures and packaging will occur mostly on weekends.

I also have some parts leftover from a 97 with 126k that I finished parting a few months back.

 

[OGBeno]

Rob: Are you willing to sell the rolling chassis with no driveline? Unlocked axles are fine.

 

[offr0adlim0]

Rob: Are you willing to sell the rolling chassis with no driveline? Unlocked axles are fine.

I am but it may be a while before it’s at that point.

 

[Cornhusker]

Do you still have the low mileage motor from that 1997?

 

[offr0adlim0]

Do you still have the low mileage motor from that 1997?

I have the cylinder head from it. The bottom end sat out in the weather and looks like it went down with the Titanic

 

[Ktaylor]

Wheel center caps?

 

[logicbyondreaso]

Interested in front passenger fender. Assuming solid metal and no dents/repairs?

 

[davedave]

Interested in front drivers side fender — you mentioned scratches, but does it have dents or clearcoat peel?

Also, what’s the condition of the front seats?

 

[offr0adlim0]

Interested in front passenger fender. Assuming solid metal and no dents/repairs?

Interested in front drivers side fender — you mentioned scratches, but does it have dents or clearcoat peel?

Also, what’s the condition of the front seats?

Will post pics of both fenders and front seat this weekend.

 

[offr0adlim0]

Wheel center caps?

Keeping the center caps with the wheels.

 

[offr0adlim0]

Fenders are rust free and straight but do have multiple scratches of varying depth. The bottom of the passenger fender may have some hidden damage as the door is sitting on top of it at the bottom. The flares have some paint fade. @davedave @logicbyondreaso

 

[offr0adlim0]

Drivetrain is out. Engine has been re-homed transmission and transfer case are ready if anyone is interested. Hood and fenders are ready to go as well.

 

[logicbyondreaso]

can you take some photos of the transmission cooler.
Interested in it with brackets and hoses that you may have. Also the little short pipe below the headlight where hoses attach.

 

[offr0adlim0]

can you take some photos of the transmission cooler.
Interested in it with brackets and hoses that you may have. Also the little short pipe below the headlight where hoses attach.

Pics of trans cooler and metal pipe through core support. Oily residue is dye from AC system.

 

[logicbyondreaso]

Sent you a message.

 

[Nad Aitch]

I want the little mudflap things that connect the front fender flares to the side steps. Ideally with any hardware you can salvage, please. Shipped to Nashville.

 

[Kernal]

Rear bumper corner end caps, availability and condition?

 

[landtank]

Fuse cover for dash ?

 

[tlc1995]

Driver side mirror housing green or black?

 

[offr0adlim0]

I want the little mudflap things that connect the front fender flares to the side steps. Ideally with any hardware you can salvage, please. Shipped to Nashville.

Will post a pic Wednesday evening. Need to dig out the hardware from the box I’ve been throwing bolts in. They are unique so shouldn’t be a problem distinguishing them from the others.