Hey guys. Putting dobinson’s 144VT and 145VT 3.5” kit on my 97’ 80 series. Radius arms have the plates on them and was going to eventually run the delta arms. Shop called and said that the raduis arms are hitting on the steering linkage. Any thoughts? I’ve seen that DOM linkage hits but not stock. Any help would be greatly appreciated.
Radius arms hitting on steering links? (5 Viewers)
- Thread starter Cowmeat
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I have read posts in the past (6 years or so, that is the last time I had an 80 with a lift) that this happens on some trucks and IIRC they just shave about 8mm or so off the top of the arm. I would do a search to see if there is any new information on this.
tmxmotorsports
SILVER Star
Are you running castor correction bushings and the castor correction plates.?
Use one or the other if you don't want to shave your radius arms some.
Time for Deltas
tmxmotorsports
SILVER Star
Get your castor checked or check it yourself.
