Typical hard and cracked hose... Which hose is this exactly? I was thinking it's okay to replace with something from Napa or the like, cut to length?
Quick hose identification (3 Viewers)
- Thread starter TeeDiggs
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
95337-06020
voodu3
SILVER Star
@NLXTACY has a kit with all of the bypass hoses 1FZ-FE Engine Little Hose Kit
- Thread starter
- #5
Awesome, thanks guys. Do you think some bulk Napa cut-to-fit would be fine here, as long as it were rated for fuel/vapor?
The others are in pretty good shape since I've replaced (unfortunately one by one)
The others are in pretty good shape since I've replaced (unfortunately one by one)
He does not carry that hose.
I would think any cut to fit would be fine there, it is not a tight bend and it is also one of the easiest hoses to reach. Probably a 5/16" or 3/8"
NLXTACY
Wits' End
true
Hey, I’m having a hard time identifying this hose. It’s between the thermostat hard pipe and the tee that goes into the firewall. I noticed that it was swollen and soft when hot and looks like it could burst at any minute while driving. Any help would be greatly appreciated. Maybe a part number?
voodu3
SILVER Star
1996 FZJ80 Coolant & Heater Hose Part Numbers & Pictures
This is subject to change, but here's what I've come up with so far(updated 7/6/2018): FZJ80 Heater Hose Part Numbers and Locations by PNWFJ80 posted Jul 6, 2018 at 11:17 AM FZJ80 Heater Hose Part Numbers and Locations by PNWFJ80 posted Jul 6, 2018 at 11:17 AM FZJ80 Heater Hose Part Numbers...
forum.ih8mud.com
heater outlet hose B
redline cruisers has helpful guide & kits
(not affiliated)
redlinelandcruisers.com
redline cruisers has helpful guide & kits
(not affiliated)
Heater Hose Kit 1FZ-FE / FZJ80
Our beloved FZJ80 / 80-Series Land Cruisers are now 25 to 29-years old and mostly likely have collected 200,000+ miles! If you want to make it to the 400,000
redlinelandcruisers.com
@3L96LX450 : are you asking about the S shaped hose?
Click on the link above in post #11, there are a sequence of photos showing the part numbers for hoses and clamps in the engine bay.
Quick answer: that S shaped hose is part of an Assembly (87209-60290) consisting of a brass T connection and two hoses attached to it
or looks like it's still available by itself (87245-60340).
Click on the link above in post #11, there are a sequence of photos showing the part numbers for hoses and clamps in the engine bay.
Quick answer: that S shaped hose is part of an Assembly (87209-60290) consisting of a brass T connection and two hoses attached to it
or looks like it's still available by itself (87245-60340).
Last edited:
