Project 88’ Fj62 that was painted with “house” paint (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

acetone dries quickly, but it wouldn't touch it?

looking under the gas door, the paint is coming off from spilled gas

atleast they didn't paint over the door handles and emblems
 
acetone dries quickly, but it wouldn't touch it?

looking under the gas door, the paint is coming off from spilled gas

atleast they didn't paint over the door handles and emblems
Yes acetone didn’t so anything kinda dulled the top coat they added? Yes I agree there is a lot of paint splatters but I can get it all off with a razor blade 👍🏻👍🏻👍🏻
 
Yes acetone didn’t so anything kinda dulled the top coat they added? Yes I agree there is a lot of paint splatters but I can get it all off with a razor blade 👍🏻👍🏻👍🏻
Brake fluid will make the paint bubble and wipe off easy, but you need to be careful to not let it soak too long and take the original stuff off as well.
 
If your wallet is deep, pull body and send to get immersion stripped.

More budget friendly but labor intensive - heat gun, plastic razor blades, and an assload of Stoner Terminator.

I will plead the 5th until my last breath on how I know this. . .

Stoner.jpg
 

Users who are viewing this thread

Back
Top Bottom