- Joined
- Sep 13, 2006
- Threads
- 124
- Messages
- 986
- Location
- Santa Monica, CA
- Website
- www.elirubelphotography.com
Anyone installed it?
How difficult?
How do you like it?
How difficult?
How do you like it?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
There are no stupid questions.I allready have new braided brake lines for a 4-6" lift from MAF.
Allready have the front disk brakes.
Allready have PS
I dont have the hysteer...this is going to sounds stupid but what does the hysteer do
I allready have new braided brake lines for a 4-6" lift from MAF.
Allready have the front disk brakes.
Allready have PS
I dont have the hysteer...this is going to sounds stupid but what does the hysteer do
EDIT, he beat me to it
moves your tie rod and steering linkage above the leaf pack. Gets rid of bumpsteer and keeps them out of the rocks.
If you are going with a shackle reversal, you are going to need modified driveshafts most likely as It's going to pull apart when you flex.
Are you running saginaw power steering or mini?
I actually allready have the MAF shackle reversal...with custom driveshafts...so I dont think Ill have a problem there.... Im running the mini PS setup
So what is the overall concensus of running SOA? Is it really that unstable over a spring under?
I am planning to do a sping over but have heard that how unstable the so is. What are your opinions.
So what is the overall concensus of running SOA? Is it really that unstable over a spring under?
I am planning to do a sping over but have heard that how unstable the so is. What are your opinions.
Thanks for the replies. I have always had 4runners and pickups which are all spring over from the factory. My plan is for my rebuild of the cruiser to do a spring over.
I was on the phone ordering parts from btbprod and they asked about my suspension. You would have thought I said I was going to run it through the shredder when I mentioned sping over.
I know they have 23 years experience. I have 20 years 4wheeling in my former pickups and 4runner. However, the FJ40's are new to me.
My plan is to use profitts kit along with some flat or stock springs.
I actually allready have the MAF shackle reversal...with custom driveshafts...so I dont think Ill have a problem there.... Im running the mini PS setup
You should cut all that s*** off....
You should cut all that s*** off....