crushers
post ho
looking good, got more pics from different angles and pics of the tarp rolled up in the back?
Registry Post Pics Of Your Modded 7x Series (8 Viewers)
- Thread starter Koffer
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Hi crazylankan,
very nice your rig,
what brand it is your flares ?
thank you
Giacomo
very nice your rig,
what brand it is your flares ?
thank you
Giacomo
What Bumper do you have on that very nice car!
some pictures of my new BJ73 
it's for rebuild my old BJ
it's for rebuild my old BJ
some pictures of my new BJ73
it's for rebuild my old BJ
Good score , and some pics of your old bj that's getting the rebuild .?.
Is the motor in that mwb a 1cyl
Hi Nima can u plz tell me where u got ur front bumper from I really want to fit one like that to my lc70
Hello,
here is my bj73 alias HELLTOY. I had already shown here: https://forum.ih8mud.com/70-series-tech/31716-post-pics-your-modded-7x-series-40.html
but since last year I installed the transmission, that I rebuilt myself with a TCI kit and a Full Manual Off Road Reverse Pattern ArtCarr kit. I rebuilt front and rear link and above all I replaced the 47" LTB by 44" Bogger because it was too wide (offset of 17x10 did not correct) I mounted on 12x15 Double Beadlock home made rims.
I put here the links to my website, that are in French but there are lots of pictures and this could perhaps help
700R4 rebuilt:
Thebj73.com
Tcase Toyota rebuilt:
Thebj73.com
NP203 rebuilt:
Thebj73.com
Jerry Nicols adapter:
Thebj73.com
12x15 Double beadlock rims Home Made:
Thebj73.com
Here are the pictures but it is not yet finished and there is still much work!
see you soon for more!
Tlcbj73
here is my bj73 alias HELLTOY. I had already shown here: https://forum.ih8mud.com/70-series-tech/31716-post-pics-your-modded-7x-series-40.html
but since last year I installed the transmission, that I rebuilt myself with a TCI kit and a Full Manual Off Road Reverse Pattern ArtCarr kit. I rebuilt front and rear link and above all I replaced the 47" LTB by 44" Bogger because it was too wide (offset of 17x10 did not correct) I mounted on 12x15 Double Beadlock home made rims.
I put here the links to my website, that are in French but there are lots of pictures and this could perhaps help
700R4 rebuilt:
Thebj73.com
Tcase Toyota rebuilt:
Thebj73.com
NP203 rebuilt:
Thebj73.com
Jerry Nicols adapter:
Thebj73.com
12x15 Double beadlock rims Home Made:
Thebj73.com
Here are the pictures but it is not yet finished and there is still much work!
see you soon for more!
Tlcbj73
Hi everyone, very nice fourm. I would like to share my rig with you.
Year and modle:
2002 FZJ74
Ih8mud handle:
oamoudi
Loc:
Saudi Arabia
Origin:
Saudi Arabia
KM:
70000
Mod:
ARB dif locks front & rear. Headders. K&N filter. Oldemu shocks
Use:
Second car mostley sand dune climbing.
Year and modle:
2002 FZJ74
Ih8mud handle:
oamoudi
Loc:
Saudi Arabia
Origin:
Saudi Arabia
KM:
70000
Mod:
ARB dif locks front & rear. Headders. K&N filter. Oldemu shocks
Use:
Second car mostley sand dune climbing.
Have u got the cone kn filter attached to your snorkel or just the drop in ??
The Auassie Poptop.
Here's my HZJ75 with the poptop,
The pink one is one of 11 HZJ75 that we hire out. The girls love them.
Here's my HZJ75 with the poptop,
The pink one is one of 11 HZJ75 that we hire out. The girls love them.
Well if you get lost in the outback that color should be easy to see from the air.
.......1978HJ45
.......1978HJ45
The K&N filter I'm using is the same as the OME. It gose inside the filter housing and the housing is connected to the snorkel.
the K&N filte I'm using is the same as the OME. It gose inside the filter housing and the housing is connected to the snorkel.
Absolutely gorgeous!
This is my Chopped LJ71, Currently replacing the 2lte with 1UZ will post updated pic when I get it back.
Similar threads
