I have a distributor with no vacuum advance on my 2F engine. I am trying to find point for it and all the pictures for points when i look up by year don't match. I have tried going up and down in years to see if they were built with different Dizzy's. I have yet to find anything close. It looks to be stock but i am having no luck with it. Any Idea's out there guys.
points for a non vacuum advance on fj40 75 2F engine. (1 Viewer)
- Thread starter cattrainer
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
See if the Chrome like polished out Vacuum Retard unit i have with the shinny gold zinc trim is a match
to what u have , i suspect it is
Vendor - Vacuum Advance Distributor LOT 19100-61100 19100-60180 pertronix More
to what u have , i suspect it is
Vendor - Vacuum Advance Distributor LOT 19100-61100 19100-60180 pertronix More
This Book should help , but Dont assume one kit is correct till U I.D> your Disturber first
- Thread starter
- #5
- Thread starter
- #6
This is inframe pics first pic was image I found doing search for likeness
- Thread starter
- #8
To all that answered my question thank you.
I found that it is a Delco Remy model 1112403.
This is from another thread.
Some info from the spec sheet:
Point gap = .019
Dwell = 28-35
Part numbers:
Points = D105P
COND = D203
ROTOR = D405
DIST CAP = D306
Timing for the Delco is approx 10-14 BTDC; tune by ear..
I found that it is a Delco Remy model 1112403.
This is from another thread.
Some info from the spec sheet:
Point gap = .019
Dwell = 28-35
Part numbers:
Points = D105P
COND = D203
ROTOR = D405
DIST CAP = D306
Timing for the Delco is approx 10-14 BTDC; tune by ear..
- Thread starter
- #9
The question now is. I have a vacuum dizzy from a 67 F engine would it fit and work with the 2 F engine?
whats the part# ?
- Thread starter
- #12
It is a 19100-60042 original for the F engine that came with the 67
