Builds PEPE - THE BLACK AND TAN BUILD (1 Viewer)

[TRAIL TAILOR]

Going back together.

J

 

[TRAIL TAILOR]

More

 

[reddog90]

More

View attachment 3066973

I'm guessing this pump works in that jar? I had to go aftermarket, didn't know there was another Toyota option. Good find.

 

[TRAIL TAILOR]

I'm guessing this pump works in that jar? I had to go aftermarket, didn't know there was another Toyota option. Good find.

Yes snaps right in. Has a different connector but easy fix with an 80 end.

 

[TRAIL TAILOR]

6061 Aluminum Intercooler sealed frame surround is set up. Bringing out the pulse TIG in a couple days.

J

 

[TRAIL TAILOR]

Rack is back from powder.

J

 

[TRAIL TAILOR]

Tailgate storage lid , all new seals and weatherstrip installed.

J

 

[TRAIL TAILOR]

Mock up on the intercooler, radiator and SPAL fan shroud is done. Will get this assy sealed up next week.

New Denso condenser, stainless battery tray, new OEM hood latch, cable, overflow bottle with hose and cap.

Build the AC hoses next week and tie into the evaporator and dryer.

J

 

[Butt Ugly Chuck]

Pretty work!

 

[TRAIL TAILOR]

3xm cargo lift glass installed today.

Jason

 

[TRAIL TAILOR]

Started on the interior this morning. Trying to keep my mind busy right now.

J

 

[TRAIL TAILOR]

Some more new parts... Hell, not much that isn't new on this build.....

J

 

[boots4]

I'm digging that center dash bezel. Nice!

 

[BurntToast]

Which seats did you go with? This build is awesome

 

[BurntToast]

Corbeau Sport

Happy with them? Seems like it’s these or the $$$ for the Scheel mans

 

[TRAIL TAILOR]

Happy with them? Seems like it’s these or the $$$ for the Scheel mans

My favorite seat is the Volvo S70 and the FJ Cruiser. But, SO hard to find nice ones anymore. Seats are like shoes... what I like; someone else may not. These are pretty nice for aftermarket and the seat brackets actually bolt right up, huge win.

I'm a bigger guy at 6-2 and 260#. The seat bolster is mid-height compared to the Scheel, which IMO is the main drawback of the Scheel for me. If you daily drive the cruiser, while the Scheel fabric is mid-quality it wears out quicker. The XL are about the same size as the Corbeau Sports according to my A$$.

 

[Redwood]

This is why I read every thread. I’m 6’8” and 320. I’ve been trying to decide how to proceed forward. I did notice that there is a seat heater option and lumbar direct through Corbeau.

@TRAIL TAILOR do you think the seat position with new brackets provide more leg room than stock brackets?

 

[TRAIL TAILOR]

This is why I read every thread. I’m 6’8” and 320. I’ve been trying to decide how to proceed forward. I did notice that there is a seat heater option and lumbar direct through Corbeau.

@TRAIL TAILOR do you think the seat position with new brackets provide more leg room than stock brackets?

I didn't order the heaters for DINGO's seats but did on the lumbar, not either on PEPE.... It's a blood pressure squeezer/bulb into a bladder. Works well, just a little cheesy...

The brackets give about 2 extra inches over stock adjustment.. If you are long legged, not enough. I'm a 34 inseam and could use another couple inches, for full comfort IMO.

 

[TRAIL TAILOR]

Trying to get this one finished up and out of the storage unit for good.

 

[ryaneddy16]

Finished up the rear bumper and off to powder. Front bumper is back from powder and resting in the frame until the motor goes in.

Jason

View attachment 3046742

View attachment 3046739View attachment 3046740View attachment 3046741

Love the build! Do you offer the rocker protection as a option on your rear bumper?